The Impact of FEM Modeling Parameters on the Computed Thermo-Mechanical Behavior of SLA Copper Shelled Electrodes
نویسندگان
چکیده
In this study, the authors use the finite element method to model and analyse a cylindrical copper shelled SLA electrode for EDM operations, which is investigated experimentally in literature. A uniform silver paint thickness and copper shell thickness is assumed around the SLA epoxy core. In the experiment, 2-D analysis was used due to the axissymmetric shape, and steady state and transient die sink EDMing simulations were followed. Modelling parameters are varied and their impact on the resulting temperature and stress fields is evaluated. The intermittent nature of the electrode thermal loading is also simulated with FEM transient analysis. It is shown that, using the finite element method, the influence of the copper shelled SLA electrode manufacturing and EDM-process parameters can be studied.
منابع مشابه
Fatigue Life of Graphite Powder Mixing Electrical Discharge Machining AISI D2 Tool Steel
The present paper deals with the design of experimental work matrices for two groups of experiments by using Response surface methodology (RSM). The first EDM group was dealt with the use of kerosene dielectric alone, while the second was treated by adding the graphite micro powders mixing to dielectric fluid (PMEDM). The total heat flux generated and fatigue lives after EDM and PMEDM models we...
متن کاملStudy Effect of Deformation Nanochannel Wall Roughness on The Water-Copper Nano-Fluids Poiseuille Flow Behavior
In the nanochannel flow behavior with respect to expand their applications in modern systems is of utmost importance. According to the results obtained in this study, the condition of nonslip on the wall of the nanochannel is not acceptable because in the nano dimensions, slip depends on different parameters including surface roughness. In this study, keeping the side area roughness, deformatio...
متن کاملThermo-Electro Mechanical Impedance based Structural Health Monitoring: Euler- Bernoulli Beam Modeling
In recent years, impedance measurement method by piezoelectric (PZT) wafer activesensor (PWAS) has been widely adopted for non-destructive evaluation (NDE). In this method, theelectrical impedance of a bonded PWAS is used to detect a structural defect. The electro-mechanicalcoupling of PZT materials constructs the original principle of this method. Accordingly, the electricalimpedance of PWAS c...
متن کاملThermo-Mechanical Properties of SLA Pattern Materials and Their Effect on Stress in Investment Shell Molds
The process of photopolymer stereo-lithography (SLA) provides a unique opportunity for the rapid prototyping of investment castings having both high surface quality and complex geometry from both ferrous and non-ferrous metals. A specific internal honeycomb structure gives a combination of high pattern stiffness needed for precise replication of geometry by investment shell molds with an extrem...
متن کاملExact Solution for Electro- Thermo- Mechanical Behavior of Composite Cylinder Reinforced by BNNTs under Non- Axisymmetric Thermo- Mechanical Loads
In this research, static stresses analysis of boron nitride nano - tube reinforced composite (BNNTRC) cylinder made of poly - vinylidene fluoride (PVDF) subjected to non - axisymmetric thermo - mechanical loads and applied voltage is developed. The surrounded elastic medium is modelled by Pasternak foundation. Composite structure is modeled based on piezoelectric fiber reinforced composite (PFR...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- IJMMME
دوره 1 شماره
صفحات -
تاریخ انتشار 2011