Anatase TiO2 with nanopores for dye-sensitized solar cells.
نویسندگان
چکیده
In this paper, a series of mesoporous anatase TiO2 crystals were prepared through a hydrothermal method. By using different carboxylic acids as solvents and additives, the morphology of the integral crystals as well as inner pores can be tuned by the chain length of the carboxylic acids. Further application of these anatase TiO2 crystals as the photoanode of DSCs resulted in an overall energy conversion efficiency of 7.55% because of their low electrical resistivity loss and improved light harvesting abilities.
منابع مشابه
High Efficient Transparent TiO2 Nanotube Dye-Sensitized Solar Cells: Adhesion of TiO2 Nanotube Membrane to FTO by Two Different Methods
In order to fabricate transparent TiO2 nanotube dye-sensitized solar cells, anodically growth nanotube membranes are detached from Ti substrate by a re-anodization method. The membranes are transferred on FTO glass by two different methods. At the first one, 100mM Ti-isopropoxide is used to make TiO2 nanoparticles for adhering TiO2 nanotube membranes to FTO and ...
متن کاملTiO2-Anatase Nanowire Dispersed Composite Electrode for Dye-Sensitized Solar Cells
TiO2 anatase nanowires have been prepared by a hydrothermal process followed by post-heat treatment in air. TiO2 nanoparticle/TiO2 nanowire composite electrodes were prepared for dye-sensitized solar cells (DSC) in order to improve light-to-electricity conversion efficiency. The TiO2 NP/TiO2 NW composite cells showed higher DSC performance than ordinary nanoparticle cells and fully nanowire cel...
متن کاملThe investigation on different light harvesting layers and their sufficient effect on the photovoltaic characteristics in dye sensitized solar cell
Titanium dioxide-based nanofibers (TiO2 nanofiber) were prepared by an electrospinning technique. The electrospun composite fibers were synthesized at different concentrations of titanium isopropoxide (25.35, 50.69, 76.05 wt%) and calcinated at different temperatures (450 oC, 650 oC and 850 oC) for 2 h. The diameters of nanofibers decreased by increas...
متن کاملVoltage enhancement in dye-sensitized solar cell using (001)-oriented anatase TiO2 nanosheets
A nanocrystalline TiO2 (anatase) nanosheet exposing mainly the (001) crystal faces was tested as photoanode material in dye-sensitized solar cells. The nanosheets were prepared by hydrothermal growth in HF medium. Good-quality thin films were deposited on F-doped SnO2 support from the TiO2 suspension in ethanolic or aqueous media. The anatase (001) face adsorbs a smaller amount of the used dye ...
متن کاملFabrication of dye sensitized solar cells with a double layer photoanode
Dye sensitized solar cell was fabricated from a double layer photoanode. First, TiO2 nanoparticles were synthesized by hydrothermal method. These TiO2 NPs were deposited on FTO glasses by electrophoretic deposition method in applied voltage of 5 V and EPD time of 2.5-10 min. Then TiO2 hollow spheres (HSs) were synthesized by sacrificed template method with Carbon Spheres as template and TTIP ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Physical chemistry chemical physics : PCCP
دوره 16 42 شماره
صفحات -
تاریخ انتشار 2014