Stiffness Analysis of 6-RSS Parallel Manipulator
نویسندگان
چکیده
This paper describes a stiffness analysis of a 6-RSS parallel manipulator by using matrix structural analysis. The stiffness analysis is based on standard concepts of static elastic deformations. The formulation has been implemented in order to obtain the stiffness matrix that can be numerically computed by defining a suitable model of the manipulator, which takes into account the stiffness properties of each element such as links and joints. The obtained stiffness matrix was used to map the end-effector compliant displacements when external forces and torques are applied on it. Finally experimental test were performed to verify the proposed methodology.
منابع مشابه
Stiffness Analysis and Optimization of a Co-axial Spherical Parallel Manipulator
This paper investigates the stiffness characteristics of spherical parallel manipulators. By virtue of singular value decomposition, the 6×6 dimensionally inhomogeneous Cartesian stiffness matrix is transformed into two homogeneous ones, i.e., the rotational and translational stiffness matrices. The decomposed singular values and the corresponding vectors indicate the directions of high/weak st...
متن کاملStiffness Analysis of a Planar 3-RPS Parallel Manipulator
This paper studied the stiffness model and characteristics of a planar 3-RPS PM with 3-DOF. The 6 × 6 form stiffness matrix of the planar 3-RPS PM is derived with both active and constrained wrenches considered. To characteristic the stiffness of the planer 3-RPS PM, two decomposition methods including the eigenscrew decomposition and the principle axes decomposition are applied to the stiffnes...
متن کاملStiffness Analysis of Overconstrained Parallel Manipulators
The paper presents a new stiffness modeling method for overconstrained parallel manipulators with flexible links and compliant actuating joints. It is based on a multidimensional lumped-parameter model that replaces the link flexibility by localized 6-dof virtual springs that describe both translational/rotational compliance and the coupling between them. In contrast to other works, the method ...
متن کاملKinematic/dynamic analysis of a 6 DOF parallel manipulator with 3-PPSP serial subchains and its implementation
In this paper, the kinematic analysis for a 6 degree-of-freedom parallel manipulator with 3-PPSP type serial subchains is performed and its kinematic characteristics are investigated via isotropic index of the first-order kinematic influence matrix. Also, dynamic analysis of the manipulator is peiformed and its dynamic characteristics is examined via the isotropic characteristics of the output ...
متن کاملDesign and Kinematic Analysis of a 4-DOF Serial-Parallel Manipulator for a Driving Simulator
This paper presents the kinematic analysis and the development of a 4-degree-of-freedom serial-parallel mechanism for large commercial vehicle driving simulators. The degrees of freedom are selected according to the target maneuvers and the structure of human motion perception organs. Several kinematic properties of parallel part of the mechanism under study are investigated, including the inve...
متن کامل