High-sensitivity optical humidity sensor based on a thin dielectric waveguide.
نویسندگان
چکیده
A low-cost, high-sensitivity humidity sensor based on a low-loss dielectric thin film waveguide (WG) is presented. The guided mode is produced by coupling laser light into the film by optical tunneling through a solid gap deposited on the base of a semi-cylindrical lens. The light reflected from this optical system carries information about the refractive index of the medium neighboring the WG, and is detected by a low-cost CCD linear sensor and analyzed with a microcontroller or personal computer. The technique presents good sensitivity to relative humidity (RH) changes, especially below 10% RH, linear behavior between 20% and 80% RH, and a response time of a few seconds.
منابع مشابه
All-Optical Graphene Oxide Humidity Sensors
The optical characteristics of graphene oxide (GO) were explored to design and fabricate a GO-based optical humidity sensor. GO film was coated onto a SU8 polymer channel waveguide using the drop-casting technique. The proposed sensor shows a high TE-mode absorption at 1550 nm. Due to the dependence of the dielectric properties of the GO film on water content, this high TE-mode absorption decre...
متن کاملPd-based integrated optical hydrogen sensor on a silicon-on-insulator platform.
We have experimentally demonstrated a compact, integrated optical hydrogen sensor on a silicon-on-insulator platform. The sensor consists of silicon waveguide coated with a thin palladium film. The sensitivity and response time of the sensor was tested for volumetric hydrogen concentrations ranging from 0% to 4%. The proposed hydrogen sensor shows great potential as a building block for an opti...
متن کاملAngle-multiplexed waveguide resonance of high sensitivity and its application to nanosecond dynamics of molecular assemblies.
We report here the experimental demonstration of a high-performance optical waveguide resonance (WR) platform based on a judicious design of a dielectric/metal stack and a fabrication process that delivers an extraordinarily low-loss optical waveguide over a noble-metal thin film. By using an atomic layer deposition process to grow a dielectric film (Al(2)O(3)) of exceptional optical quality an...
متن کاملLow temperature formation Silver-Copper alloy nanoparticles using hydrogen plasma treatment for fabrication of humidity sensor
In this paper, a novel method of producing bi-metallic alloy nanoparticles at low temperatures using hydrogen bombardment of thin films, deposited on glass substrates, is introduced. Optical and morphological characteristics of the nanoparticles were extensively studied for various conditions of plasma treatment, such as plasma power density, temperature, duration of hydrogen bombardment, thick...
متن کاملNano-Anatase TiO2 for High Performance Optical Humidity Sensing on Chip
An on-chip optical humidity sensor using Nano-anatase TiO₂ coating is presented here. The coating material was prepared so that the result is in solution form, making the fabrication process quick and simple. Then, the solution was effortlessly spin-coated on an SU8 straight channel waveguide. Investigating the sensitivity and performance (response time) of the device revealed a great linearity...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Applied optics
دوره 52 18 شماره
صفحات -
تاریخ انتشار 2013