A simple blind placement of the left-sided double-lumen tubes: Erratum

One-lung ventilation (OLV) has been commonly provided by using a double-lumen tube (DLT). Previous reports have indicated the high incidence of inappropriate DLT positioning in conventional maneuvers.After obtaining approval from the medical ethics committee of First Affiliated Hospital of Anhui Medical University and written consent from patients, 88 adult patients belonging to American society of anesthesiologists (ASA) physical status grade I or II, and undergoing elective thoracic surgery requiring a left-side DLT for OLV were enrolled in this prospective, single-blind, randomized controlled study. Patients were randomly allocated to 1 of 2 groups: simple maneuver group or conventional maneuver group. The simple maneuver is a method that relies on partially inflating the bronchial balloon and recreating the effect of a carinal hook on the DLTs to give an idea of orientation and depth. After the induction of anesthesia the patients were intubated with a left-sided Robertshaw DLT using one of the 2 intubation techniques. After intubation of each DLT, an anesthesiologist used flexible bronchoscopy to evaluate the patient while the patient lay in a supine position. The number of optimal position and the time required to place DLT in correct position were recorded.Time for the intubation of DLT took 100 ± 16.2 seconds (mean ± SD) in simple maneuver group and 95.1 ± 20.8 seconds in conventional maneuver group. The difference was not statistically significant (P = 0.221). Time for fiberoptic bronchoscope (FOB) took 22 ± 4.8 seconds in simple maneuver group and was statistically faster than that in conventional maneuver group (43.6 ± 23.7 seconds, P < 0.001). Nearly 98% of the 44 intubations in simple maneuver group were considered as in optimal position while only 52% of the 44 intubations in conventional maneuver group were in optimal position, and the difference was statistically significant (P < 0.001).This simple maneuver is more rapid and more accurate to position left-sided DLTs, it may be substituted for FOB during positioning of a left-sided DLT in condition that FOB is unavailable or inapplicable.