Shear modulus and material damping of municipal solid waste based on large-scale cyclic triaxial testing
نویسندگان
چکیده
Representative dynamic properties of municipal solid waste (MSW) are required to perform reliable seismic analyses of MSW landfills. A comprehensive large-scale cyclic triaxial laboratory testing program was performed on MSW retrieved from a landfill in the San Francisco Bay area to evaluate the small-strain shear modulus, and strain-dependent normalized shear modulus reduction and material damping ratio relationships of MSW. The effects of waste composition, confining stress, unit weight, time under confinement, and loading frequency on these dynamic properties were evaluated. The small-strain shear modulus depends primarily on waste composition, confining stress, unit weight, and time under confinement. The normalized shear modulus reduction and material damping curves for MSW depend on waste composition and confining stress. Based on the results of this study and a review of literature, strain-dependent shear modulus reduction and material damping relationships are recommended for use in landfill design.
منابع مشابه
Recent Findings on the Static and Dynamic Properties of Municipal Solid Waste
The design of Municipal Solid Waste (MSW) landfills requires the selection of representative MSW material properties. The profession’s understanding of the mechanical response of MSW has evolved significantly in recent years, but many aspects of the response of MSW remain uncertain. A research project involving five organizations was conducted to systematically evaluate the factors that affect ...
متن کاملThe Validity Assessment of Laboratory Shear Modulus Using In-Situ Seismic Piezocone Test Results
Seismic piezocone device (SCPTu) together with Resonant Column and Cyclic Triaxial test apparatus are employed to measure small strain shear modulus (G0) of carbonate sandy and clayey soils of southern coasts of Iran. A large area of southern regions of Iran is formed from clay, silt and sand. In this study, maximum shear modulus that is derived from both field (by seismic piezocone) and labora...
متن کاملDynamic Characteristics of Municipal Solid Waste with Degradation in Bioreactor Landfills
Bioreactor landfills are operated to enhance refuse decomposition, gas production, and waste stabilization. The major aspect of bioreactor landfill operation is the recirculation of collected leachate back through the refuse mass. Due to the presence of additional leachate and accelerated decomposition, the dynamic characteristics of MSW in bioreactor landfills are expected to change. Assessmen...
متن کاملReducing the Forces Caused by Earthquake on Retaining Walls Using Granulated Rubber-Soil Mixture
In recent years, various studies have been undertaken on how to use waste materials in civil engineering projects. Among waste materials, waste rubber has been highlighted to be used for different purposes such as reinforcing of soil and making of reinforced slopes. To investigate the properties of granulated rubber-soil mixture and its application in making of slopes behind retaining walls, so...
متن کاملPredictive Model for Normalized Shear Modulus of Cohesive Soils
called maximum shear modulus, Gmax. It can be determined by in-situ methods from the measurements of the shear wave velocity, Vs, by means of crosshole, down-hole, up-hole, or surface wave testing. The relationship between maximum shear modulus and shear wave velocity is rigorous: 2 max s G V where ρ is soil density. This parameter can be also obtained in laboratory by resonant column or ...
متن کامل