A Battery Power Bank with Series-Connected Buck–Boost-Type Battery Power Modules
نویسندگان
چکیده
The operation of a battery power bank with series-connected buck–boost-type battery power modules (BPMs) was investigated in this study. Each BPM consisted of a battery pack with an associated buck–boost converter for individually controlling battery currents. With a proposed discharging scenario, load voltage regulation with charge equalization among batteries was performed by controlling the battery currents in accordance with their state-of-charges (SOCs) estimated by real-time battery-loaded voltages detected under the same operating condition. In addition, the fault tolerance was executed to isolate exhausted or faulty batteries from the battery power bank without interrupting the system operation. Experiments were conducted to verify the effectiveness of the discharging scenario for a laboratory battery power bank with four series buck–boost BPMs.
منابع مشابه
Regenerative Braking for an Electric Vehicle Using Ultracapacitors and a Buck-Boost Converter
An ultracapacitor bank control system for an Electric Vehicle has been simulated. The purpose of this device is to allow higher accelerations and decelerations of the vehicle with minimal loss of energy, and minimal degradation of the main battery pack. The system uses an IGBT Buck-Boost converter, which is connected to the ultracapacitor bank at the Boost side, and to the main battery at the B...
متن کاملEnergy Management Strategy of Stand-alone Photovoltaic System in Cathodic Protection Pipeline
In this paper, the stand-alone photovoltaic system for cathodic protection of underground pipelines is presented. The proposed system offers continuous and automatic adjustment of the applied voltage so that the buried pipelines receive the exact current. A modified perturb and observe (P&O) algorithm for maximum power point tracking (MPPT) is used to improve dynamic and steady state performa...
متن کاملBidirectional Buck-Boost Integrated Converter for Plug-in Hybrid Electric Vehicles
Background and Objectives: Power electronics infrastructures play an important role in charging different types of electric vehicles (EVs) especially Plug-in Hybrid EVs (PHEVs). Designing appropriate power converters is the topic of various studies. Method: In this paper, a novel bidirectional buck-boost multifunctional integrated converter is presented which is capable of handling battery and ...
متن کاملCurrent Scheduling for Parallel Buck Regulated Battery Modules
In an electrical energy storage and delivery system, a parallel connection of battery modules can be used to increase the storage capability and power delivery demands. Parallel connection of batteries requires a robust battery management system as batteries may have different operating parameters such as state-of-charge (SoC), open-circuit voltage (OCV), internal resistance or battery chemistr...
متن کاملLi-Ion Battery Charging with a Buck-Boost Power Converter for a Solar Powered Battery Management System
This paper analyzes and simulates the Li-ion battery charging process for a solar powered battery management system. The battery is charged using a non-inverting synchronous buck-boost DC/DC power converter. The system operates in buck, buck-boost, or boost mode, according to the supply voltage conditions from the solar panels. Rapid changes in atmospheric conditions or sunlight incident angle ...
متن کامل