An Experimental Study on the Air Delivery and Gas Removal Method in a Model of Furnace for Ferroalloy Production

نویسنده

  • M. SATERNUS
چکیده

S. Gil, J. Góral, J. Ochman, M. Saternus, W. Bialik, Department of Metallurgy, Silesian University of Technology, Katowice, Poland In the paper, results of a model study on the effects of the air delivery and flue gas removal method on the intensity of gas blending in the hood space are presented. Two design solutions were compared: with one or two outlet channels for the hood gases. Moreover, two variants of air delivery through charging doors were analysed. The study results show that for technological reasons, more beneficial gasodynamic conditions are obtained when the hood is fitted with two symmetrically located gas outlet channels and the air is sucked through four charging doors.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

An Experimental Gasodynamic Study of a Model of Furnace for Ferroalloy Production

S. Gil, J. Góral, J. Ochman, M. Saternus Department of Metallurgy, Silesian University of Technology, Katowice, Poland A gasodynamic study of a model of hood space was performed based on measurements of velocity and concentration distributions of gases. The experiments have shown that the absolute values of gas velocities in the hood and the outlet channel as well as their profi les do not depe...

متن کامل

Numerical Study of Reduction of NOx Emission by High Temperature Air Combustion Technology

A numerical study on Nox emission from an industrial furnace utilizing high temperature air combustion (HTAC) technology was done. The basic concept of the regenerative burner including heating a diluting of fresh air by flue gas was implemented in a two-dimensional furnace model. Governing equations in conjunction with a turbulence model and an overall chemistry model were solved using an impl...

متن کامل

CO2 Removal from Air in a Countercurrent Rotating Packed Bed, Experimental Determination of Height of Transfer Unit

Carbon dioxide capture is a key issue in climate change mitigation. For decades the removal of carbon dioxide has been an essential step in many industrial processing operations such as the synthesis of ammonia, natural gas purification, and oil refining. In this study, a rotating packed bed has been designed for absorption of carbon dioxide from an air stream. The rotating packed bed is a comp...

متن کامل

An Investigate on Power, Torque and Exhaust Gas Emission Variation: Effect of Hydroxy Gas Addition to Inlet Air of a SI Engine

Hydrogen has been known as a clean and suitable fuel to replace conventional fossil fuels. One of the common hydrogen production methods is using water electrolysis process. This method produces oxygen as well as hydrogen by ratio of 1:2. The aim of this work is to investigate the effects of inlet air enrichment by adding produced hydrogen and oxygen to an internal combustion engine. For this p...

متن کامل

بررسی آزمایشگاهی و عددی اثر زاویه چرخش هوای ورودی بر دما و تشکیل آلاینده‌های CO و NO در یک کوره سوخت مایع

In the present paper, experimental and numerical investigation of a laboratory oil furnace have been done to study the effect of inlet air swirl angle on temperature and generating of pollutant CO and NO. The Concentration of pollutant CO and NO on the centerline of the furnace have been measured using gas analyzer. The numerical results are in good agreement with experimental data. The results...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2014