Improved bio-physical performance of hydroxyapatite coatings obtained by electrophoretic deposition at dynamic voltage

نویسندگان

  • Armin Tahmasbi Rad
  • Mehran Solati-Hashjin
  • Noor Azuan Abu Osman
  • Shahab Faghihi
چکیده

This study investigates the effects of the electrophoretic deposition process (EPD) at dynamic voltage on the physical and biological characteristics of hydroxyapatite (HA) coatings. HA powder is synthesized and used for preparation of HA/ethanol suspension which is subsequently characterized by X-ray diffraction (XRD), energy-dispersive spectroscopy (EDS), Fourier transform infrared spectroscopy (FT-IR), zeta potential and particle size analyses. Samples are prepared from commercially pure titanium (CP-Ti) substrates and coated with HA using EPD at dynamic voltage that keeps a constant depositional rate by adjusting the current and electrical field during the process. The HA-coated samples are dried and sintered at 800 1C for 2 h to densify the coatings. The XRD, scanning electron microscopy (SEM), EDS and adhesion tests are used to characterize the coated samples. The cross-sectional SEM images indicate that the thickness of coatings enhances as the current increases from 0.07 to 0.35 mA. The coatings are more uniform, packed and non-cracked at lower currents while HA particles start to arrange in a highly porous structure and show non-uniform, cracked and non-stable coatings as the current increases. The results also demonstrate that the best adhesions for the coatings are obtained at lower currents of 0.07 and 0.15 mA. Morphological studies and cell biological experiments are conducted using MG63 cells cultured on the HA-coated sample with the best overall physical performance. The number of attached and proliferated cells on the selected HA-coated sample is higher than on the non-coated titanium sample and culture plate used as control. There are significantly higher ALP activity and better cytoskeleton organization of cells on the HA-coated sample. This study shows that the EPD process at dynamic voltage can influence the structure and morphology of the coatings; therefore, substrate engineering can be used to improve and control cell–substrate interactions. & 2014 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/3.0/).

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Electrophoretic Deposition of Microwave Combustion Synthesized Hydroxyapatite and Its Carbon Nanotube Reinforced Nanocomposite on 316L Stainless Steel

Nanohydroxyapatite-carbon nanotube Nanocomposite (HA-CNT) coatings were deposited via electrophoretic deposition (EPD). Hydroxyapatite was synthesized via microwave combustion method using calcium nitrate and glycing as starting materials. X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) revealed that pure hydroxyapatite nanoparticles have been synthesized. AISI 316L s...

متن کامل

Preparation of Nanohydroxyapatite-Carbon Nanotube Composite Coatings on 316L Stainless Steel Using Electrophoretic Deposition

Nanohydroxyapatite-carbon nanotube composite coatings were deposited via electrophoretic deposition (EPD). AISI 316L stainless steel and ethanol were used as substrate and dispersing medium, respectively. 5%wt carbon nanotube (CNT) was used as reinforcing phase. Uniform and macrocrack-free coatings were obtained both for hydroxyapatite (HA) and HA-5%wt CNT coatings. Scanning electron micros...

متن کامل

Hydroxyapatite coating by electrophoretic deposition at dynamic voltage.

The aim of this study was to evaluate hydroxyapatite (HA) coatings produced by dynamic voltage during electrophoretic deposition (EPD). Dynamic voltages from 0 to 200 V were incrementally applied in three interims. The as-deposited coating was sintered at 800 degrees C and its properties evaluated. Structure and phase analyses of both as-deposited and sintered coatings were evaluated by scannin...

متن کامل

Novel Bioactive Antimicrobial Lignin Containing Coatings on Titanium Obtained by Electrophoretic Deposition

Hydroxyapatite (HAP) is the most suitable biocompatible material for bone implant coatings; its brittleness, however, is a major obstacle, and the reason why research focuses on creating composites with biopolymers. Organosolv lignin (Lig) is used for the production of composite coatings, and these composites were examined in this study. Titanium substrate is a key biomedical material due to it...

متن کامل

Deposition of Nano-Crystalline Fluor-hydroxyapatite Coatings on Titanium Substrates via Sol-Gel Method

      In this investigation, fluor-hydroxyapatite (FHA) film was deposited on a titanium substrate by sol-gel method. Triethyl phosphite, ammonium fluoride and calcium nitrate in ethanol solutions were used respectively as P, F and Ca precursors. Typical apatite structures were obtained for all coatings after dipping and subsequent heat treatment at 550, 700 and 800 ºC, the coating layers were ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2014