Behavioural Model of Integrated Circuits for EMC Prediction
نویسنده
چکیده
This paper deals with the modeling of integrated circuits for electromagnetic compatibility (EMC) analysis. With reference to complex integrated circuits that usually include huge core logic blocks, analog and mixed signal circuits as well as power sections (smart-power system-on-chip), the paper shows a new behavioral model whose parameters can be derived on the basis of scattering parameters and switching noise measurements. Through this new model, the electromagnetic emissions arising from such system-on-chip in application boards can be evaluated and mitigated before fabrication.
منابع مشابه
A MEMS Capacitive Microphone Modelling for Integrated Circuits
In this paper, a model for MEMS capacitive microphone is presented for integrated circuits. The microphone has a diaphragm thickness of 1 μm, 0.5 × 0.5 mm2 dimension, and an air gap of 1.0 μm. Using the analytical and simulation results, the important features of MEMS capacitive microphone such as pull-in voltage and sensitivity are obtained 3.8v and 6.916 mV/Pa, respectively while there is no...
متن کاملImprovement of System Robustness through EMC Optimization
The electromagnetic compatibility (EMC) became a major concern for integrated circuits (ICs) during the last years. As the operating frequency has increased and the supply voltage has become lower, the electromagnetic emission as well as the susceptibility of integrated circuits increased tremendously. Generally speaking, EMC is defined as the ability of an electrical system to work properly in...
متن کاملAn EMC-oriented VHDL-AMS simulation methodology for dynamic current activity assessment
Dynamic current activity extraction plays a very important role in estimating the electromagnetic compatibility of integrated circuits. For that purpose, the Integrated Circuit Electromagnetic Model (ICEM) is being developped by the International Electrotechnical Commission (IEC). This article introduces a mixed-mode simulation methodology, based on the VHDL-AMS language, which dramatically red...
متن کاملAn EMC-Compliant Design Method for High-density Integrated Circuits
This paper deals with an innovative method of EMCcompliant design. This technique helps to optimize emission level as soon as in the design phase, and provides noise-related solutions which will be evaluated and integrated into the silicon. This method allows to model the activity of thousand-gate circuits thanks to only two current generators which represent supply current consumption in the V...
متن کاملEMC’04/Sendai ABSTRACT MODELING OF SIGNAL BEHAVIOUR IN INTERCONNECTED INTEGRATED CIRCUITS BASED ON BLACK BOX APPROACH AND MODEL ORDER REDUCTION
MODELING OF SIGNAL BEHAVIOUR IN INTERCONNECTED INTEGRATED CIRCUITS BASED ON BLACK BOX APPROACH AND MODEL ORDER REDUCTION Grzegorz Lubkowski 1 , Radoslaw Piesiewicz 1 , Werner John 2 FhG IZM / University of Paderborn, Berlin/Paderborn – Germany Fraunhofer Institute for Reliability and Microintegration – Advanced Systems Engineering Technologiepark 34, 33100 Paderborn E-mail: grzegorz.lubkowski@p...
متن کامل