Study of the Appropriate Factors for Laminated Bamboo Bending by Design of Experiments
نویسندگان
چکیده
This research studied the appropriate factors and conditions for laminated bamboo bending by Design of Experiments (DOE). The interested factors affecting the spring back in laminates bamboo were (1) time, (2) thickness, and (3) frequency. This experiment tested the specimen by using high frequency machine and measured its spring back immediately and next 24 hours for comparing the spring back ratio. Results from the experiments showed that significant factors having major influence to bending of laminates bamboo were thickness and frequency. The appropriate conditions of thickness and frequency were 4 mm. and 1.5 respectively. Keywords—Bamboo, Bending, Spring Back, Design of Experiments (DOE).
منابع مشابه
Numerical Determination of Delamination Onset in Laminated Symmetric DCB Specimen
In this study, a novel numerical method is proposed for determination of mode-I interlaminar fracture toughness, GIc, in multi-directional (MD) double cantilever beam (DCB) specimens using fracture properties of unidirectional DCB specimens. Two factors, β and Dc are defined to minimize the undesirable effects on strain energy release rate. β describes the difference between maximum and average...
متن کاملExperimental Studies on the Mechanical Property of Laminated Bamboo in Thailand
A new generation product made from bamboo strips, known as laminated bamboo, has gained importance. The objective of this research was to experiment the effect of three factors on the mechanical property of laminated bamboo. The interested factors for experimental design were (A) four bamboo species, namely Bambusa blumeana Schultes (Pai See Suk), Dendrocalamus asper Backer (Pai Tong), Dendroca...
متن کاملThe Research of Parallel to the Grain Compression Performance Test of Laminated Glued Bamboo-wood Composites
Original scientific paper Research of bamboo-wood composites compression performance provides a basis for material selections for prestressed glued bamboo-wood beams and other components whose compression is mainly shared by glued bamboo-wooden composites. Four kinds of wood and two kinds of bamboo were selected to comprise 22 groups (6 specimens each group) divided into 4 batches to study the ...
متن کاملThe Effect of Joint Form and Parameter Values on Mechanical Properties of Bamboo-Bundle Laminated Veneer Lumber (BLVL)
Bamboo-bundle laminated veneer lumber (BLVL) was produced by joint lengthening technology. The objective of this study was to evaluate the effect of joint form and the values of key parameters on mechanical properties of BLVL. Two joint forms, i.e., finger joint and scarf joint, and two corresponding joint parameters, i.e., finger length and scarf angle, were investigated in laminates. The resu...
متن کاملSize-dependent Bending of Geometrically Nonlinear of Micro-Laminated Composite Beam based on Modified Couple Stress Theory
In this study, the effect of finite strain on bending of the geometrically nonlinear of micro laminated composite Euler-Bernoulli beam based on Modified Couple Stress Theory (MCST) is studied in thermal environment. The Green-Lagrange strain tensor according to finite strain assumption and the principle of minimum potential energy is applied to obtain governing equation of motion and boundary c...
متن کامل