Improvements of calcium oxide based sorbents for multiple CO2 capture cycles
نویسندگان
چکیده
This study presents the development of a novel calcium-oxide sorbent for carbon dioxide capture. In this work, CaO sorbent was impregnated with different molar percentage of titanium ethoxide. The sorbent prepared with 50 % of titanium ethoxide resulted in the best uptake characteristics for CO2. Compared to others, a higher BET surface area and a larger pore volume were observed. An excellent stability during extended carbonationdecarbonation cycles was also demonstrated. The high titanium content limits the sintering of particles and thus stabilizes the microstructure of CaO.
منابع مشابه
Attrition study on cement-supported biomass-activated calcium sorbents for CO2 capture
Attrition study on cement-supported biomass-activated calcium sorbents for CO2 capture Lunbo Duan *, Zhijian Yu , María Erans , Yingjie Li , Vasilije Manovic , Edward J. Anthony ‡ † Key Laboratory of Energy Thermal Conversion and Control, Ministry of Education, School of Energy and Environment, Southeast University, Nanjing 210096, China ‡ Combustion and CCS Centre, Cranfield University, Bedfor...
متن کاملCO2 Capture Performance Using Biomass-templated Cement-supported Limestone Pellets
Synthetic biomass-templated cement-supported CaO-based sorbents were produced by granulation process for high-temperature post-combustion CO2 capture. Commercial flour was used as the biomass and served as a templating agent. The investigation of porosity showed that the pellets with biomass or cement resulted in enhancement of porosity. Four types of sorbents containing varying proportions of ...
متن کاملEffect of SO2 and steam on CO2 capture performance of biomass-templated calcium aluminate pellets.
Four types of synthetic sorbents were developed for high-temperature post-combustion calcium looping CO2 capture using Longcal limestone. Pellets were prepared with: lime and cement (LC); lime and flour (LF); lime, cement and flour (LCF); and lime, cement and flour doped with seawater (LCFSW). Flour was used as a templating material. All samples underwent 20 cycles in a TGA under two different ...
متن کاملCO2 Capture at High Temperature and Low Concentration on Li4SiO4 Based Sorbents
Solid sorbents based on lithium orthosilicate (Li4SiO4) have shown promise for CO2 capture at high temperature. Improved sorption properties can be obtained by appropriate doping. In this study, different promoted Li4SiO4-based sorbents were prepared by addition of potassium carbonate and binary/ternary alkali (Li, K and Na) carbonate eutectic mixtures. The CO2 sorption properties of the sorben...
متن کاملC2ee21394j 7368..7375
A series of high-capacity, amine impregnated sorbents based on a cost-effective silica foam with ultralarge mesopores is reported. The sorbents exhibit fast CO2 capture kinetics, high adsorption capacity (of up to 5.8 mmol g 1 under 1 atm of dry CO2), as well as good stability over multiple adsorption– desorption cycles. A simple theoretical analysis is provided relating the support structure t...
متن کامل