Dev125252 4340..4350

نویسندگان

  • Victoria C. Garside
  • Rebecca Cullum
  • Olivia Alder
  • Daphne Y. Lu
  • Ryan Vander Werff
  • Mikhail Bilenky
  • Yongjun Zhao
  • Steven J. M. Jones
  • Marco A. Marra
  • T. Michael Underhill
  • Pamela A. Hoodless
چکیده

Heart valve formation initiates when endothelial cells of the heart transform into mesenchyme and populate the cardiac cushions. The transcription factor SOX9 is highly expressed in the cardiac cushion mesenchyme, and is essential for heart valve development. Loss of Sox9 in mouse cardiac cushion mesenchyme alters cell proliferation, embryonic survival, and valve formation. Despite this important role, little is known about how SOX9 regulates heart valve formation or its transcriptional targets. Therefore, we mapped putative SOX9 binding sites by ChIP-Seq in E12.5 heart valves, a stage at which the valve mesenchyme is actively proliferating and initiating differentiation. Embryonic heart valves have been shown to express a high number of genes that are associated with chondrogenesis, including several extracellular matrix proteins and transcription factors that regulate chondrogenesis. Therefore, we compared regions of putative SOX9 DNA binding between E12.5 heart valves and E12.5 limb buds. We identified context-dependent and context-independent SOX9interacting regions throughout the genome. Analysis of contextindependent SOX9 binding suggests an extensive role for SOX9 across tissues in regulating proliferation-associated genes including key components of the AP-1 complex. Integrative analysis of tissuespecific SOX9-interacting regions and gene expression profiles on Sox9-deficient heart valves demonstrated that SOX9 controls the expression of several transcription factors with previously identified roles in heart valve development, including Twist1, Sox4,Mecom and Pitx2. Together, our data identify SOX9-coordinated transcriptional hierarchies that control cell proliferation and differentiation during

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

The influence of applied stress rate on the stress corrosion cracking of 4340 and 3.5NiCrMoV steels in distilled water at 30°C

Linearly Increasing Stress Tests conducted in 30 C aerated distilled water using as-quenched 4340 and 3.5NiCrMoV turbine rotor steels indicated that stress corrosion cracking occurred at all applied stress rates for 4340 steel, whilst only at applied stress rates less than or equal to 0.002 MPa s 1 for the turbine rotor steel. The crack velocity increased with increasing applied stress rate for...

متن کامل

The Effect of Ten Days of Heat Acclimation on Exercise Capacity during Acute Altitude Exposure (4350 m)

Acclimation to one environmental stressor may enhance adaptations to various other stressors in humans; this phenomenon has been described as cross-tolerance. Approaches to induce altitude acclimation in a relatively short time frame are needed, thus the purpose of our study was to examine the effect of heat acclimation on exercise capacity during acute altitude exposure (4350 m). Eight trained...

متن کامل

Optimization of Process Parameters based on Surface Roughness and Cutting Force in MQL Turning of AISI 4340 using Nano Fluid

The aim of this research work is focused on optimization of process parameters under Minimum Quantity Lubrication (MQL) using nano fluid in turning of AISI 4340. A study of effect of process parameters in turning of AISI 4340 under MQL condition with nano fluid (Multiwalled Carbon Nano Tube) on the cutting force generated and machined surface roughness is carried out. In the experiment conducte...

متن کامل

Adiabatic Shear in Remco Iron and Quenched and Tempered 4340 Steel

Adiabatic shear localization is studied in two ferrous metals, Remco Iron, a high purity alpha iron, and 4340 steel, quenched and tempered at 650°C. Punching-shear experiments are performed in a compressive split-Hopkinson bar producing shear strain rates of 45,000 s-'. Optical and scanning electron microscopy was performed on the deformed shear specimens to determine the extent of shear locali...

متن کامل

Scanning Based Induction Heating for AISI 4340 Steel Spline Shafts-3D Simulation and Experimental Validation

This paper presents an investigation of non-stationary induction heating process applied to AISI 4340 steel spline shafts based on 3D simulation and experimental validation. The study is based on the knowledge, concerning the form of correlations between various induction heating parameters and the final hardness profile, developed in the case of stationary induction heating. The proposed appro...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2015