Direct energy gap group IV semiconductor alloys and quantum dot arrays in SnxGe1−x/Ge and SnxSi1−x/Si alloy systems

نویسندگان

  • Regina Ragan
  • Kyu S. Min
  • Harry A. Atwater
چکیده

The narrow gap semiconductor alloys SnxGe1−x and SnxSi1−x offer the possibility for engineering tunable direct energy gap Group IV semiconductor materials. For pseudomorphic SnxGe1−x alloys grown on Ge (001) by molecular beam epitaxy, an indirect-to-direct bandgap transition with increasing Sn composition is observed, and the effects of misfit on the bandgap analyzed in terms of a deformation potential model. Key results are that pseudomorphic strain has only a very slight effect on the energy gap of SnxGe1−x alloys grown on Ge (001) but for SnxGe1−x alloys grown on Ge (111) no indirect-to-direct gap transition is expected. In the SnxSi1−x system, ultrathin pseudomorphic epitaxially-stabilized -SnxSi1−x alloys are grown on Si (001) substrates by conventional molecular beam epitaxy. Coherently strained -Sn quantum dots are formed within a defect-free Si (001) crystal by phase separation of the thin SnxSi1−x layers embedded in Si (001). Phase separation of the thin alloy film, and subsequent evolution occurs via growth and coarsening of regularly-shaped -Sn quantum dots that appear as 4–6 nm diameter tetrakaidecahedra with facets oriented along elastically soft 100 directions. Attenuated total reflectance infrared absorption measurements indicate an absorption feature due to the -Sn quantum dot array with onset at 0.3 eV and absorption strength of 8×10 cm, which are consistent with direct interband transitions. © 2001 Elsevier Science B.V. All rights reserved.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Direct Energy Bandgap Group IV Alloys and Nanostructures

Novel group IV nanostructures were fabricated and the optical properties of such nanostructures were investigated for monolithic integration of optically active materials with silicon. The SnxGe1-x alloy system was studied due to the previous demonstration of an indirect to direct energy bandgap transition for strain-relieved SnxGe1-x films on Si(001). In addition, quantum confined structures o...

متن کامل

Controlling the Composition and Morphology of Si1-xGex Nanowires

Silicon (Si) and germanium (Ge) semiconductor nanowires can be utilized in next generation electronic, photonic, and energy conversion devices. Si, Ge, and Si1-xGex materials are also well studied and currently used in industry. Optoelectronic properties, such as the band gap, can be tuned by modulating the alloy composition, thus allowing for a wider range of uses. The focus of this project wa...

متن کامل

Origin of the unusually large band-gap bowing and the breakdown of the band-edge distribution rule in the SnxGe1−x alloys

The unusual nonlinear behaviors of the band gaps in SnxGe1−x alloys are investigated using first-principles calculations. We show that the large bowing of the direct band gap is induced by the disordering effect. Moreover, we calculated individual contribution of the band-edge states and found that the bowing of the conduction band edge is much larger than the bowing of the valence band edge, a...

متن کامل

Diamond cubic Sn-rich nanocrystals: synthesis, microstructure and optical properties

Diamond cubic Sn-rich nanocrystals were fabricated with radii less than 20 nm by post-growth annealing at T = 750 ◦C of SnxGe1−x alloys grown on Ge(001) by molecular beam epitaxy. The crystal phase of the Sn-rich nanocrystals was determined to be diamond cubic from Fourier transform analysis of high-resolution transmission electron microscopy images. Optical transmittance of these SnxGe1−x/Ge (...

متن کامل

The Effect of pH on the Optical Band Gap of PbSe Thin Film with Usability in the Quantum Dot Solar Cell and Photocatalytic Activity

This study was an attempt to provide a simple solution processed synthesis route for Lead Selenide (PbSe) nanostructure thin films using the chemical bath deposition (CBD) method which is commercially available in inexpensive precursors. In the CBD method, the preparation parameters play a considerable role and determine the nature of the final product formed. Known as two main factors, the eff...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2001