Wind turbine modelling and identification for control system applications
نویسندگان
چکیده
This paper deals with a model of a 3-bladed wind turbine and its identification. The linear, time-invariant state-space model has been developed at Fraunhofer IWES mainly for control engineering applications. Its parameters are obtained from an operational modal analysis carried out on a commercial 5MW turbine. The parameterised model is validated by comparison of estimated time series and measurement from a field test using an observer based estimation approach.
منابع مشابه
Different Types of Pitch Angle Control Strategies Used in Wind Turbine System Applications
The most common controller in wind turbine is the blade pitch angle control in order to get the desired power. Controlling the pitch angle in wind turbines has a direct impact on the dynamic performance of the machine and fluctuations in the power systems. Due to constant changes in wind speed, the wind turbines are of nonlinear and multivariate system. The design of a controller that can ad...
متن کاملWind Turbine Control And Monitoring Advances In Industrial Control
Title Type wind turbine control and monitoring advances in industrial control PDF wind turbine control systems principles modelling and gain scheduling design advances in industrial control PDF optimal control of wind energy systems towards a global approach advances in industrial control PDF dynamic modelling of gas turbines identification simulation condition monitoring and optimal control ad...
متن کاملA Combined Vector and Direct Power Control for AC/DC/AC Converters in DFIG Based Wind Turbine
The doubly-fed generators (DFIG) have clear superiority for the applications of large capacity and limited-range speed control case due to the partially rated inverter, lower cost and high reliability. These characteristics enable the doubly-fed wound rotor induction machine to have vast applications in wind-driven generation.In this paper Combined Vector and direct power control (CVDPC) strate...
متن کاملRobust Model- Based Fault Detection and Isolation for V47/660kW Wind Turbine
In this paper, in order to increase the efficiency, to reduce the cost and to prevent the failures of wind turbines, which lead to an extensive break down, a robust fault diagnosis system is proposed for V47/660kW wind turbine operated in Manjil wind farm, Gilan province, Iran. According to the acquired data from Iran wind turbine industry, common faults of the wind turbine such as sensor fault...
متن کاملImproving Data-based Wind Turbine Using Measured Data Foggy Method
The purpose of this paper is to improve the modeling of the data-driven wind turbine system that receives data from noise signals. Most of the data on industrial systems is noisely and data noise is inevitable and natural. The method and idea proposed in this paper, Data Fogging, significantly reduce the impact of noise on data-driven wind turbine system modeling, which is the basis of this met...
متن کامل