Force Controllable Hydro-Elastic Actuator
نویسندگان
چکیده
We present a hydro-elastic actuator that has a linear spring intentionally placed in series between the hydraulic piston and actuator output. The spring strain is measured to get an accurate estimate of force. This measurement alone is used in PI feedback to control the force in the actuator. The spring allows for high force fidelity, good force control, minimum impedance, and large dynamic range. A third order linear actuator model is broken into two fundamental cases: fixed load – high force (forward transfer function), and free load – zero force (impedance). These two equations completely describe the linear characteristics of the actuator. This model is presented with dimensional analysis to allow for generalization. A prototype actuator that demonstrates force control and low impedance is also presented. Dynamic analysis of the prototype actuator correlates well with the linear mathematical model. This work done with hydraulics is an extension from previous work done with electro-mechanical actuators. Keywords— Series Elastic Actuator, Force Control, Hydraulic Force Control, Biomimetic Robots
منابع مشابه
A Force-Controllable Compact Actuator Module for a Wearable Hand Exoskeleton
In this paper, a force-controllable compact actuator module for a wearable hand exoskeleton system is proposed. To interact with virtual objects naturally with a hand exoskeleton, a small actuator module, which can generate the desired force accurately, is highly required. In the proposed actuator module, a series elastic actuator (SEA) mechanism was applied for the force mode control. Based on...
متن کاملGeneralization of Series Elastic Actuator Configurations and Dynamic Behavior Comparison
The Series Elastic Actuator (SEA) has recently been developed by many research groups and applied in various fields. As SEA is the combination of motor, spring, gear and load, various types and configurations of mechanism have been developed as SEAs to satisfy many requirements necessary for the applications. This paper provides a theoretical framework to categorize and compare these various co...
متن کاملSimultaneous Force and Stiffness Control of a Pneumatic Actuator
This paper proposes a new approach to the design of a robot actuator with physically variable stiffness. The proposed approach leverages the dynamic characteristics inherent in a pneumatic actuator, which behaves in essence as a series elastic actuator. By replacing the four-way servovalve used to control a typical pneumatic actuator with a pair of three-way valves, the stiffness of the series ...
متن کاملSeries Elastic Actuators for legged robots
Series Elastic Actuators provide many benefits in force control of robots in unconstrained environments. These benefits include high force fidelity, extremely low impedance, low friction, and good force control bandwidth. Series Elastic Actuators employ a novel mechanical design architecture which goes against the common machine design principal of “stiffer is better”. A compliant element is pl...
متن کاملSeries Elastic Actuator Development for a Biomimetic Walking Robot
Series Elastic Actuators have linear springs intentionally placed in series between the motor and actuator output. The spring strain is measured to get an accurate estimate of force. Despite using a transmission to achieve high force/mass and high power/mass, the spring allows for good force control, high force fidelity, minimum impedance, and large dynamic range. A second order linear actuator...
متن کامل