Contact pressure distribution in joints formed by V-band clamps
نویسندگان
چکیده
V-band clamps offer an efficient clamping solution in diverse applications including process equipment, exhaust systems and air handling. This paper studies the distribution of interface contact pressure between the V-band and flange when the coupling is established. The determination of the contact area and pressure distribution in a joint is essential information, as it determines the integrity of the coupling. A three dimensional finite element model has been developed for this purpose. Contrary to the previous assumption in developing axisymmetric models, the 3D results showed that the contact pressure is nonuniform around the circumference of V-band with maximum contact pressure near the T-bolt area. This is in agreement with the theory in the literature. The presence and magnitude of friction has a noticeable influence on the form of the interface pressure distribution curve. It is also shown that the diameter of the band interacts with the effect of friction.
منابع مشابه
Predicting and Determining the Contact Pressure Distribution in Joints Formed by V-band Clamps
V-band clamps are utilised in a wide range of industries to connect together a pair of circular flanges, for ducts, pipes, turbocharger housings and even to form a joint between satellites and their delivery vehicle. In this paper, using a previously developed axisymmetric finite element model, the impact of contact pressure on the contact surface of the V-band clamp was studied and surface rou...
متن کاملUltimate Axial Load Capacity of V-band Clamp Joints
Band clamps with a flat bottomed V-section are used to connect a pair of circular flanges to provide a joint with significant axial strength. Despite the wide application of V-band clamps, their behaviour is not fully understood and the ultimate axial strength is currently only available from physical testing. This physical testing has indicated that the ultimate strength is determined by two d...
متن کاملFinite element prediction of the ultimate axial load capacity of V-section band clamps
Band clamps with a flat bottomed V-section are used to connect a pair of circular flanges to provide a joint with significant axial strength. Despite the wide application of Vband clamps, their behaviour is not fully understood and the ultimate axial strength is currently only available from physical testing. This physical testing has indicated that the ultimate strength is determined by two di...
متن کاملStudy of System Pressure Dependence on n-TiO2/p-Si Hetrostructure for Photovoltaic Applications
This study reports the fabrication of n-TiO2/p-Si hetrojunction by deposition of TiO2nanowires on p-Si substrate. The effect of system pressure and the current-voltage (I-V) characteristics of n-TiO2/p-si hetrojunction were studied. The morphology of the samples was investigated by Field Emission Scanning Electron Microscopy (FESEM) which confirms formation of T...
متن کاملPredicting Plastic Deformation and Work Hardening during V- Band Formation
V-Band Clamps are manufactured using a cold roll forming process consisting of six passes which plastically deform an initially flat strip by bending to produce the band’s V-section. In this paper a new method of validating numerically predicted plastic deformation in a cold formed metal strip is presented. Tensile testing of samples of the band’s material was used to obtain a direct link betwe...
متن کامل