Biphasic Electrode Suspensions for Li-Ion Semi-Solid Flow Cells with High Energy Density, Fast Charge Transport, and Low-Dissipation Flow
نویسندگان
چکیده
T.-S. Wei, Prof. J. A. Lewis School of Engineering and Applied Science Wyss Institute for Biologically Inspired Engineering Joint Center for Energy Storage Research Harvard University Cambridge , MA 02138 , USA E-mail: [email protected] F. Y. Fan, Prof. Y.-M. Chiang Department of Materials Science and Engineering Joint Center for Energy Storage Research Massachusetts Institute of Technology Cambridge , MA 02139 , USA E-mail: [email protected] A. Helal, Prof. G. H. Mckinley Department of Mechanical Engineering Joint Center for Energy Storage Research Massachusetts Institute of Technology Cambridge , MA 02139 , USA E-mail: [email protected] Prof. K. C. Smith Department of Mechanical Science and Engineering Joint Center for Energy Storage Research University of Illinois at Urbana-Champaign Urbana , IL 61801 , USA E-mail: [email protected]
منابع مشابه
SnO2 Nanowires on Carbon Nanotube Film as a High Performance Anode Material for Flexible Li-ion Batteries
Today, Li-ion batteries (LIBs) are the most common rechargeable batteries used in electronic devices. SnO2 with theoretical specific capacity of 782 mAh/g is among the best anode materials for LIBs. In this report, Three-dimensional SnO2 nanowires (NWs) on carbon nanotube (CNT) thin film (SnO2 / CNT) is fabricated using a combination of vacuum filtration and thermal evaporation techniques. The ...
متن کاملStatic and Dynamic Studies on LiNi1/3Co1/3Mn1/3O2‐Based Suspensions for Semi‐Solid Flow Batteries
LiNi1/3 Co1/3 Mn1/3 O2 (LNCM)-based suspensions for semi-solid flow batteries (SSFB) have been investigated by galvanostatic charge/discharge an electrochemical impedance spectroscopy (EIS). The resistance and electrochemical performance of half cells (vs. Li/Li(+) ) as well as the rheological properties are affected by the content of a commercially available electroconductive carbon black [Ket...
متن کاملIntegrated Solid/Nanoporous Copper/Oxide Hybrid Bulk Electrodes for High-performance Lithium-Ion Batteries
Nanoarchitectured electroactive materials can boost rates of Li insertion/extraction, showing genuine potential to increase power output of Li-ion batteries. However, electrodes assembled with low-dimensional nanostructured transition metal oxides by conventional approach suffer from dramatic reductions in energy capacities owing to sluggish ion and electron transport kinetics. Here we report t...
متن کاملInvestigation of Hydroxylated Carbon Felt Electrode in Vanadium Redox Flow Battery by Using Optimized Supporting Electrolyte
Traditional vanadium batteries use pure sulfuric acid as electrolyte, but H2SO4 does not absorb enough vanadium ions to make the electrolyte an efficient energy source. This study investigates the effect of hydroxylation process on electrochemical and operational properties of carbon felt electrode in VOSO4 solution with an optimized supporting electrolyte (a mixture of six parts HCl and 2.5 pa...
متن کامل(7)Li in situ 1D NMR imaging of a lithium ion battery.
The spatial distribution of charge carriers in lithium ion batteries during current flow is of fundamental interest for a detailed understanding of transport properties and the development of strategies for future improvements of the electrolyte-electrode interface behaviour. In this work we explored the potential of (7)Li 1D in situ NMR imaging for the identification of concentration gradients...
متن کامل