Ensemble bias-correction based state of charge estimation of lithium-Ion batteries

نویسنده

  • Yifei Li
چکیده

It is an essential task of battery management system (BMS) to online estimate the State of Charge (SoC) of a Lithium-ion (Li-ion) battery, an important indicator of the remaining charge in the battery. Accurate modeling of the electrical behavior of a Li-ion battery can provide an accurate approximation of the battery dynamic characteristics during charging/discharging and relaxation phases. This is essential to accurate online estimation of the battery SoC. Equivalent circuit models (ECMs) are widely used to assist with online SoC estimation because of their simplicity and high computational efficiency. This thesis proposes an ensemble bias-correction (BC) method with adaptive weights to improve the accuracy of an equivalent circuit model (ECM) in dynamic modeling of Li-ion batteries. The contribution of this thesis is threefold: (i) the introduction of the concept of time period; (ii) the development of a novel ensemble method based on BC learning to model the dynamic characteristics of Li-ion batteries; and (iii) the creation of an adaptive-weighting scheme to learn online the weights of offline member BC models for building an online ensemble BC model. Repeated pulsing discharge tests with single and multiple C-rates were conducted on seven Li-ion battery cells to evaluate the effectiveness of the proposed ensemble BC method.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Development of Lifetime Prediction Model of Lithium-Ion Battery Based on Minimizing Prediction Errors of Cycling and Operational Time Degradation Using Genetic Algorithm

Accurate lifetime prediction of lithium-ion batteries is a great challenge for the researchers and engineers involved in battery applications in electric vehicles and satellites.  In this study, a semi-empirical model is introduced to predict the capacity loss of lithium-ion batteries as a function of charge and discharge cycles, operational time, and temperature. The model parameters are obtai...

متن کامل

Improved nanofluid cooling of cylindrical lithium ion battery pack in charge/discharge operation using wavy/stair channels and copper sheath

Abstract: In order to improve the thermal management system for cooling an electric vehicle battery pack, the thermal performance of the battery pack in two states of charge and discharge in different working conditions by using a copper sheath around the batteries and a copper sheath, as well as a stair channel on top of the battery pack and using of nanofluid as cooling fluid, has been studie...

متن کامل

An Effective Nitrogen Doping Technique for Improving the Performance of Lithium Ion Batteries with CNT Based Electrodes

Lithium ion batteries are among the most used rechargeable batteries in the world. Carbon nanostructures including carbon nanotubes (CNTs) are considered as important electrode materials for this kind of batteries. Therefore improving the performance of these carbon based electrodes in Lithium ion batteries is an important issue and attracts much attention in the battery community. In this manu...

متن کامل

Electrode Materials for Lithium Ion Batteries: A Review

Electrochemical energy storage systems are categorized into different types, according to their mechanisms, including capacitors, supercapacitors, batteries and fuel cells. All battery systems include some main components: anode, cathode, an aqueous/non-aqueous electrolyte and a membrane that separates anode and cathode while being permeable to ions. Being one of the key parts of any new electr...

متن کامل

Internal Resistance based State of Charge Estimation for Lead acid and Lithium ion Batteries - A Simulink Approach

Estimating the state of charge is important for any battery operated device. In case of automobile batteries, which are designed to deliver large power, many methods such as open circuit voltage based, ampere hour counting based, impedance based are used for calculating the state of charge. Internal resistance of a battery at a particular temperature directly gives the information about the sta...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2018