Measurement of physical properties of polyurethane plaster
نویسندگان
چکیده
Physical properties of building materials can be defined by material coefficients. The material coefficients examined were: coefficient of mean density, coefficient of specific heat capacity, coefficient of thermal conductivity, and coefficient of thermal diffusivity. Physical properties of a newly-developed material (polyurethane plaster), were subjected to nondestructive analysis. The same method and same conditions of measurement were applied to measure the properties of comparative samples made of Ytong. In order to measure the coefficient of thermal conductivity and coefficient of thermal capacity, a new comparative method was designed and verified and also a new calorimetric apparatus was used.
منابع مشابه
Nonlinear Optical Properties of Rigid Polyurethane Foam/SiO2 Nanocomposite
Polyurethane closed cell (PUCC)/SiO2 nanocomposites have been prepared by using in situ polymerization approach. The third-order optical nonlinearities of PUCC/SiO2 nanocomposites, dissolved in DMF are characterized by Z-scan technique at the measurement wavelength of 532 nm. The nonlinear refractive (NLR) indices and nonlinear absorption (NLA) coefficients of samples were calculated from close...
متن کاملImprovement of gas separation properties of polyurethane membrane using plasma grafting
In recent years, plasma treatments have given good results since they offer high technological efficiency with low waste generation. One of the most important characteristics of plasma methods is their action only on a thin surface layer, whereas the bulk of sample remains unchanged and the modified material keeps its chemical and mechanical properties. In this research, polyurethane membrane s...
متن کاملتأثیر افزودنیهای میکرونیزه سیلیکاتی در کاهش نفوذپذیری و فرسایش ناشی از بارش مصنوعی اندود کاهگل
Kahgel is one of the oldest traditional mortars in Iran capabilities and performance of which in the past to conserve earthen buildings show that it can be used as a covering for conservation and preservation of earthen architectural structures. The ancient waterproof covering is very efficient at keeping the building dry during the heavy rain showers, but low durability and the need for renewa...
متن کاملAccuracy and precision of polyurethane dental arch models fabricated using a three-dimensional subtractive rapid prototyping method with an intraoral scanning technique
OBJECTIVE This study aimed to evaluate the accuracy and precision of polyurethane (PUT) dental arch models fabricated using a three-dimensional (3D) subtractive rapid prototyping (RP) method with an intraoral scanning technique by comparing linear measurements obtained from PUT models and conventional plaster models. METHODS Ten plaster models were duplicated using a selected standard master ...
متن کاملOptimization mechanical properties of polyurethane/Sio2 nanocomposite on Polypropylene substrate for automotive clear coating by Taguchi method
The effect of different parameters including: nano silica content, curing temperature, type of hardener, and flash-off time on mechanical and optical properties of polyurethane PU based clearcoat was investigated via standard Taguchi L9 method. Dispersion of nano silica in the resultant nanocomposites was explored by scanning electron microscopy SEM. SEM images showed a fine dispersion through ...
متن کامل