Mixture Models for Estimating Maximum Blood Flow Velocity.
نویسندگان
چکیده
OBJECTIVES A gaussian mixture model (GMM) was recently developed for estimating the probability density function of blood flow velocity measured with transcranial Doppler ultrasound data. In turn, the quantiles of the probability density function allow one to construct estimators of the "maximum" blood flow velocity. However, GMMs assume gaussianity, a feature that is not omnipresent in observed data. The objective of this work was to develop mixture models that do not invoke the gaussian assumption. METHODS Here, GMMs were extended to a skewed GMM and a nongaussian kernel mixture model. All models were developed on data from 59 patients with closed head injuries from multiple hospitals in the United States, with ages ranging from 13 to 81 years and Glasgow Coma Scale scores ranging from 3 to 11. The models were assessed in terms of the log likelihood (a goodness-of-fit measure) and via visual comparison with the underlying spectrograms. RESULTS Among the models examined, the skewed GMM showed a significantly (P< .05) higher log likelihood for 56 of the 59 patients and produced maximum flow velocity estimates consistent with the observed spectrograms for all patients. Kernel mixture models are generally less "robust" in that their quality is inconsistent across patients. CONCLUSIONS Among the models examined, it was found that the skewed GMM provided a better model of the data both in terms of the quality of the fit and in terms of visual comparison of the underlying spectrogram and the estimated maximum blood flow velocity. Nongaussian mixture models have potential for even higher-quality assessment of blood flow, but further development is called for.
منابع مشابه
A double-gaussian, percentile-based method for estimating maximum blood flow velocity.
OBJECTIVES Transcranial Doppler sonography allows for the estimation of blood flow velocity, whose maximum value, especially at systole, is often of clinical interest. Given that observed values of flow velocity are subject to noise, a useful notion of "maximum" requires a criterion for separating the signal from the noise. All commonly used criteria produce a point estimate (ie, a single value...
متن کاملPresentation of a Non-invasive Method of Estimating Arterial Stiffness by Modeling Blood Flow and Arterial Wall Based on the Determination of Elastic Module of Arterial Wall
Introduction: Arterial stiffness is an important predictor of cardiovascular risk. Several indices have been introduced to estimate the arterial stiffness based on the changes in the brachial blood pressure. Since the substitution of the blood pressure changes in the central arteries such as carotid with the blood pressure changes in the brachial results in error in the blood...
متن کاملNumerical Simulation of Flow Pattern around the Bridge Pier with Submerged Vanes
Bridges are very important for establishing communication paths. For this reason, it is important to control scour around bridge piers. Several methods have been proposed for scour control. One of the most useful methods is the use of submerged vanes. In the other hand, laboratory circumstances force many considered effective factors to be skipped in the scour phenomenon. In this situation, the...
متن کاملSubcooled two-phase flow boiling in a microchannel heat sink: comparison of conventional numerical models
Subcooled flow boiling in multi-microchannels can be used as an efficient thermal management approach in compact electrical devices. Highly subcooled flow boiling of HFE 7100 is studied in two microchannel heat sinks to choose a proper numerical model for simulating boiling flows in microchannels. Results of five different numerical models, including Volume of Fluid (VOF), Eulerian boiling, Eul...
متن کاملThe Effects of Pressure Difference in Nozzle’s two Phase Flow on the Quality of Exhaust Mixture
In the most application of nozzle with gas-liquid two-phase flow, the quality of mixture in exhaust of nozzle is the most important parameter as well as the flow velocity. On the other hand, in some industrial application, such as water injection in forced induction (turbocharged or supercharged) internal combustion engine the spray quality is the main goal of designing. In this case and for im...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Journal of ultrasound in medicine : official journal of the American Institute of Ultrasound in Medicine
دوره 35 1 شماره
صفحات -
تاریخ انتشار 2016