STUDIES CONCERNING NEW BALL-BEARINGS HAVING 35 mm THE INNER DIAMETER OF THE INTERNAL RING (part II)
نویسنده
چکیده
The paper presents some aspects regarding the deflections of new construction of ball-bearings with 35mm the dimension of the inner diameter, providing from the standard construction of the 6305 ballbearing. Different constructions were obtained using an algorithm, having another internal geometry, other dimensions of the rings and other number of balls, in the way to obtain higher static or dynamic performances/ capacities. The ball-bearings are mounted on shafts and the experimental part uses an especial device.
منابع مشابه
Performance of integrated retainer rings in silicon micro-turbines with thrust style micro-ball bearings
This work explores the performance of different silicon retainer ring designs when integrated into silicon micro-turbines (SMTs) incorporating thrust style bearings supported on 500 μm diameter steel balls. Experimental performance curves are presented for SMTs with rotor diameters of 5 mm and 10 mm, each with five different retainer designs varying in mechanical rigidity, ball pocket shape and...
متن کاملInternal Loading Distribution in Statically Loaded Ball Bearings Subjected to a Centric Thrust Load: Numerical Aspects
A known iterative computational procedure is used for internal normal ball loads calculation in statically loaded single-row, angular-contact ball bearings, subjected to a known thrust load, which is applied in the inner ring at the geometric bearing center line. Numerical aspects of the iterative procedure are discussed. Numerical examples results for a 218 angular-contact ball bearing have be...
متن کاملInvestigating the Dynamics of a Ball-Spring Autobalancer in a Rotor with Non-Linear Bearings
Although the traditional automatic ball balancer (ABB) has numerous advantages, it has two major deficiencies, i.e., it has a limited balance stable region and it increases the vibration amplitude of the rotor at transient state. These deficiencies limit the applicability of ABBs. In this regard, a new type of ABB called “the Ball-spring autobalancer” has been proposed to resolve the mentioned ...
متن کاملDynamic Analysis of a Rotor Supported on Ball Bearings with Waviness and Centralizing Springs and Squeeze Film Dampers
Squeeze film dampers (SFDs) are often used in machines with high rotational speed to reduce non-periodic behavior by creating external damping. There are some structural parameters which are of great importance in designing these systems, such as oil film thickness and inner race mass of SFD. Moreover, there is a crucial parameter associated with manufacturing process, under the title of wavine...
متن کاملInternal Loading Distribution in Statically Loaded Ball Bearings, Subjected to a Combined Radial and Thrust Load, Including the Effects of Temperature and Fit
A new, rapidly convergent, numerical procedure for internal loading distribution computation in statically loaded, singlerow, angular-contact ball bearings, subjected to a known combined radial and thrust load, which must be applied so that to avoid tilting between inner and outer rings, is used to find the load distribution differences between a loaded unfitted bearing at room temperature, and...
متن کامل