Cryogenic Refractive Index of Heraeus
نویسندگان
چکیده
This paper reports measurements of the refractive index of Homosil (Heraeus) over the wavelength range of 0.34—3.16 μm and temperature range of 120—335 K. These measurements were performed by using the Cryogenic High Accuracy Refraction Measuring System (CHARMS) facility at the NASA’s Goddard Space Flight Center. These measurements were in support of an integrated Structural-Thermal-Optical-Performance (STOP) model that was developed for a fieldwidened Michelson interferometer that is being built and tested for the High Spectral Resolution Lidar (HSRL) project at the NASA Langley Research Center (LaRC). The cryogenic refractive index measurements were required in order to account for the highly sensitive performance of the HSRL instrument to changes in refractive index with temperature, temperature gradients, thermal expansion, and deformation due to mounting stresses. A dense coverage of the absolute refractive index over the aforementioned wavelength and temperature ranges was used to determine the thermo-optic coefficient (dn/dT) and dispersion relation (dn/dλ) as a function of wavelength and temperature. Our measurements of Homosil will be compared with measurements of other glasses from the fused silica family studied in CHARMS as well as measurements reported elsewhere in the literature.
منابع مشابه
The Cryogenic Refractive Indices of S-ftm16, a Unique Optical Glass for Near-infrared Instruments
The Ohara glass S-FTM16 is of considerable interest for near-infrared optical designs because it transmits well through the K band and because negative S-FTM16 elements can be used to accurately achromatize positive calcium fluoride elements in refractive collimators and cameras. Glass manufacturers have sophisticated equipment to measure the refractive index at room temperature, but cannot typ...
متن کاملUse of Michelson and Fabry-Perot interferometry for independent determination of the refractive index and physical thickness of wafers.
We present a method to independently measure the refractive index and the thickness of materials having flat and parallel sides by using a combination of Michelson and Fabry-Perot interferometry techniques. The method has been used to determine refractive-index values in the infrared with uncertainties in the third decimal place and thicknesses accurate to within +/- 5 microm for materials at r...
متن کاملThermal lensing in cryogenic sapphire substrates
We report the reduction of the thermal lensing in cryogenic sapphire mirrors, which is planed to be used in the Large scale Cryogenic Gravitational wave Telescope (LCGT) project. We measured three key parameters of sapphire substrate for thermal lensing at cryogenic temperature. They are optical absorption coefficient, thermal conductivity and temperature coefficient of refractive index at cryo...
متن کاملStudying Focusing Properties of Graded Index Photonic Crystals Made of Material with Different Refractive Index
In this paper we investigate focusing properties of graded index (GRIN) photonic crystal (PC) structures which are composed of different materials with different refractive indices. GRIN PC structure is constructed from air holes in dielectric background. The holes radii are varied in the normal direction to the propagation in such a way that a parabolic effective refractive index is produced. ...
متن کاملMeasuring the temperature dependence of refractive index in water phantom for precise monitoring of the absorbed dose by radiation therapy techniques
In this paper, an experimental setup is used to measure the temperature dependence of the refractive index of a water phantom. In radiation calorimetry by laser beams and interferometric systems, the amount of change induced by radiation within the phantom can be accurately measured. Absorption of dose and the resulted change in temperature changes the refractive index within the material. In o...
متن کامل