Qualitative assessment of isocyanate skin exposure in auto body shops: a pilot study.

نویسندگان

  • Y Liu
  • J Sparer
  • S R Woskie
  • M R Cullen
  • J S Chung
  • C T Holm
  • C A Redlich
چکیده

BACKGROUND Little is known about the extent of human isocyanate skin exposure in auto body shops and the effectiveness of personal protective equipment. Animal studies have suggested that skin exposure to isocyanates may be an important risk factor for respiratory sensitization leading to asthma. This study provides initial data on hexamethylene diisocyanate skin exposure in three auto body shops. METHODS Three auto body shops of different size which use different paint systems were examined for the presence of aliphatic isocyanates on environmental surfaces and workers' skin and for breakthrough of personal protective equipment. Qualitative detection of contamination by isocyanates was conducted using a wipe-sampling technique. Assessment focused on the painters and their tasks, although other auto body repairers were also evaluated. RESULTS Environmental surfaces such as painters' workbenches, spray equipment, and cleaning tools were found contaminated with isocyanates. Painters had frequent contact with contaminated surfaces, often without wearing gloves. Moderate to heavy contamination of some skin surfaces was found with painters from two of the three auto body shops. Latex gloves used for skin protection showed significant penetrations by isocyanates even after a single painting session. CONCLUSIONS Contaminated environmental surfaces and skin exposure to isocyanates were documented in several auto body shops. Latex gloves were not adequate protection for workers using isocyanate paints. Further research which would better quantify skin exposure, and its potential relationship to respiratory sensitization and asthma is warranted.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Skin exposure to aliphatic polyisocyanates in the auto body repair and refinishing industry: a qualitative assessment.

OBJECTIVES Although respiratory exposures have been the primary concern with isocyanates, skin exposure also can occur and may contribute to sensitization and asthma. Methodologies to assess isocyanate skin exposure in the workplace are limited and skin exposure data scarce. The goals of this study were (i) to evaluate and validate the isocyanate colorimetric indicators against a quantitative a...

متن کامل

Determinants of isocyanate exposures in auto body repair and refinishing shops.

As part of the Survey of Painters and Repairers of Auto bodies by Yale (SPRAY), the determinants of isocyanate exposure in auto body repair shops were evaluated. Measurements (n = 380) of hexamethylene diisocyanate-based monomer and polyisocyanate and isophorone diisocyanate-based polyisocyanate were collected from 33 auto body shops. The median total reactive isocyanate concentrations expresse...

متن کامل

Isocyanate SWYPETM Semi-quantitative Surface Sampling in the Puget Sound Collision Repair Industry - Pilot Study

Isocyanates are a leading cause of work-related asthma and workers in the auto-collision repair industry are at high risk for isocyanate exposures, particularly by the dermal route (Bello et al, 2007a and SHARP 2005). This project aims to extend and validate a rapid colorimetric surface wipe method, SWYPE™, for measuring isocyanate surface contamination in the workplace (Liu et al 2000 and 2005...

متن کامل

Determination of airborne isocyanates generated during the thermal degradation of car paint in body repair shops.

Polyurethanes are widely used in car paint formulations. During thermal degradation, such polymeric systems can generate powerful asthmatic sensitizing agents named isocyanates. In body repair shops, the thermal degradation of car paint can occur during abrasive processes that generate enough heat to involve release of isocyanates in air. An environmental monitoring study was performed in two b...

متن کامل

Assessment of exposure to lead through air and biological monitoring in a lead and zinc mine

 Background and aim: Lead is ubiquitous and one of the earliest metals discovered by the human. This metal is widely used in different industries due to its important physico-chemical properties like softness, high malleability, ductility, low melting point and resistance to corrosion. Lead absorbed in body with several routs and when transfer in blood is primarily in red blood cells. Human exp...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • American journal of industrial medicine

دوره 37 3  شماره 

صفحات  -

تاریخ انتشار 2000