On the balancing control of humanoid robot
نویسندگان
چکیده
This paper proposes the kinematic resolution method of CoM(center of mass) Jacobian with embedded motions and the design method of posture/walking controller for humanoid robots. The kinematic resolution of CoM Jacobian with embedded motions makes a humanoid robot balanced automatically during movement of all other limbs. Actually, it offers an ability of WBC(whole body coordination) to humanoid robot. Also, we prove that the proposed posture/walking controller brings the ISS(disturbance input-to-state stability) for the simplified bipedal walking robot model.
منابع مشابه
Flexible Foot/Ankle Based on PKM with Force/Torque Sensor for Humanoid Robot
This paper describes the development of a novel humanoid robot foot/ankle based on an orientation Parallel Kinematic Mechanism for intelligent and flexible control. With three identical Universal-Prismatic-Spherical prismatic-actuated limbs and a central Universal-Revolute passive limb, the PKM can perform three degrees of freedom rotation motions. In order to enable the humanoid robot safely t...
متن کاملPreliminary Results on Two-Feet Balancing on a Seesaw
This paper overviews some preliminary results on the control of humanoid robots when balancing on a seesaw. We first model the dynamics of the robot along with the seesaw, and then synthesize simple control strategies for balancing tasks. Preliminary validations of the framework have been conducted both on simulations and real scenarios involving the iCub robot balancing on a semi-cylindrical s...
متن کاملActive Balancing Reflexes for Small Humanoid Robots
To be practical, humanoid robots must be able to manoeuvre over a variety of flat and uneven terrains, at different speeds and with varying gaits and motions. This paper describes three balancing-reflex algorithms (threshold control, PID control, and hybrid control) that were implemented on a real 8 DOF robot equipped with only an accelerometer sensor to study the capabilities and limitations o...
متن کاملBalancing of humanoid robot using contact force/moment control by task-oriented whole body control framework
Balancing control of humanoid robots is of great importance since it is a necessary functionality not only for maintaining a certain position without falling, but also for walking and running. For position controlled robots, the force/torque sensors at each foot are utilized to measure the contact forces and moments, and these values are used to compute the joint angles to be commanded for bala...
متن کاملA Receding Horizon Push Recovery Strategy for Balancing the iCub Humanoid Robot
Balancing and reacting to strong and unexpected pushes is a critical requirement for humanoid robots. We recently designed a capture point based approach which interfaces with a momentum-based torque controller and we implemented and validated it on the iCub humanoid robot. In this work we implement a Receding Horizon control, also known as Model Predictive Control, to add the possibility to pr...
متن کاملA Semi-Minimalistic Approach to Humanoid Design
Locomotion of a Humanoid robot with lesser number of actuators is a choice of interest, as it leads to energy efficient design. This paper put emphasis on design of a humanoid robot with minimal actuation, minimal control and minimum development cost. It describes, design considerations and methods used for balancing and walking gait generation of a Humanoid Robot with 8 Degrees of Freedom. The...
متن کامل