Large Class 1.3 Rocket Motor Detonation Character

نویسنده

  • CLAUDE MERRILL
چکیده

Large explosive class 1.3 solid .propellant rocket motors utilizing polybutadiene binder, aluminum fuel, and ammonium perchlorate oxidizer are typically considered explosively vlsafell. That is, the required stimulus is so large that motor detonation is extremely unlikely, even when donored by a sizeable high explosive charge. Two large ground cratering events have occurred during recent years in motor destruct operations. Recently, a 10,000 kilogram grain containing 90 percent combined aluminum and ammonium perchlorate solids was subjected to a 25 kilogram C4 donor. Discussion of the nature of these events and the large test and how observed results affect our outlook on large motor hazards will be presented.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Acoustic-Mean Flow Interaction in Solid Propellant Rocket Motors

There are several sources for pressure oscillations in solid propellant rocket motors. Oscillatory flow field is one of them. Free shear layers in motor flow field cause vortex shedding. End edges of propellant grains and baffle edge in two-segmented motors are samples of such zones. These vortices move from their forming points and strike the field walls. The kinetic energy of vortices change ...

متن کامل

Acoustic-Mean Flow Interaction in Solid Propellant Rocket Motors

There are several sources for pressure oscillations in solid propellant rocket motors. Oscillatory flow field is one of them. Free shear layers in motor flow field cause vortex shedding. End edges of propellant grains and baffle edge in two-segmented motors are samples of such zones. These vortices move from their forming points and strike the field walls. The kinetic energy of vortices change ...

متن کامل

Flow-Structural Interaction in Solid Rocket Motors

This article reviews and summarizes recent work on flow-structural interaction in solid motors. This interaction is important because it can lead to rocket motor failure. In the first part of the document, an idealized model of the failure mechanism is developed to illustrate in simple terms how such an event can occur. In the second part of this article recently published numerical modeling wo...

متن کامل

Preliminary Design of a Pulsed Detonation Based Combined Cycle Engine

* Member Technical Staff † Vice-President ‡ Professor and Chairman £ Professor Abstract Results of a recent investigation in the design of a single flow path combined cycle engine using periodic detonation waves are presented here. Four modes of operation are used in a sample SSTO trajectory in this preliminary design (sketched in Fig. [1]): (1) An ejector augmented pulsed detonation rocket for...

متن کامل

Cold Flow Simulations for a Pulse Detonation Rocket Ejector

This paper reports an exploratory experimental cold flow test of the first mode in a multi-mode propulsion concept. A small model of a wallmounted pulse detonation rocket (PDR) ejecting into a duct was fabricated and integrated into the supersonic wind tunnel at the University of Texas at Arlington (UTA). Although supersonic testing proved to be inconclusive, the static tests showed that pulsed...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2009