Ultrasound-Assisted Extraction of Arabinogalactan and Dihydroquercetin Simultaneously from Larix gmelinii as a Pretreatment for Pulping and Papermaking

An ultrasound-assisted extraction (UAE) method using ethanol was applied for extracting arabinogalactan (AG) and dihydroquercetin (DHQ) simultaneously from larch wood, as a pretreatment for pulping and papermaking. The extraction parameters were optimized by a Box-Behnken experimental design with the yields of AG and DHQ as the response values. Under optimum conditions (three extractions, each using 40% ethanol, for 50 min, 200 W ultrasound power and 1∶18 solid-liquid ratio), the yields of AG and DHQ were 183.4 and 36.76 mg/g, respectively. After UAE pretreated, the wood chips were used for Kraft pulping (KP) and high boiling solvent pulping (HBSP). The pulping yield after pretreatment was higher than that of untreated (the pulping yields of untreated HBSP and KP were 42.37% and 39.60%, and the pulping yields of HBSP and KP after UAE-pretreated were 44.23% and 41.50% respectively), as indicated by a lower kappa number (77.91 and 27.30 for untreated HBSP and KP; 77.01 and 26.83 for UAE-pretreated HBSP and KP). Furthermore, the characteristics of paper produced from pretreated wood chips were superior to those from the untreated chips: the basis weight was lower (85.67 and 82.48 g·cm(-2) for paper from untreated KP and HBSP; 79.94 and 80.25 g·cm(-2) for paper from UAE-pretreated KP and HBSP), and the tensile strengths, tearing strengths, bursting strengths, and folding strengths were higher than these of paper after UAE-pretreated, respectively.