Operation Simulation of Traction Systems
نویسندگان
چکیده
The objective of this paper is initially to present a basic modeling of the railway traction system. This model includes the basic technologies used today. The voltage dependencies of the maximal possible power consumption as well as the maximal velocity of the common Rc-locomotives are included. The latter is very crucial for the studies of time table sensitivity, which is of our immediate interest. Moreover, a method is presented, that estimates the expected train delay time for a given feeding technology. The reference timetable assumes the same train and surrounding conditions, but no voltage drops. In the numerical example where the developed model is applied to a realistic test system, a set of possible amounts of railway traffic are treated as uncertainties. Mainly, the contributions of this paper are three: compiling and connecting already accepted models, the development of a method for numerical calculations using this model compilation, and an example to apply this model on.
منابع مشابه
Inner Permanent Magnet Synchronous Machine Optimization for HEV Traction Drive Application in Order to Achieve Maximum Torque per Ampere
Recently, Inner permanent magnet (IPM) synchronous machines have been introduced as a possible traction motor in hybrid electric vehicle (HEV) and traction applications due to their unique merits. In order to achieve maximum torque per ampere (MTPA), optimization of the motor geometry parameters is necessary. This paper Presents a design method to achieve minimum volume, MTPA and minimum ...
متن کاملA Comprehensive Model for Adhesion Control System of Wheel and Rail
This paper presents the movement dynamic of the train and the relationship between the speed of wheel and train, as well as a discussion about the concept of wheel slip. There are two different operation regions designated as creep and wheelspin areas for wheel slip. Creep and wheelspin areas have stable and unstable characteristics, respectively. Wheels and rails are constructed from iron, and...
متن کاملRating Reduction and Optimized DC-Link Voltage of the HPQC in Co-Phase Traction Power System
Electric traction trains are huge non-linear single-phase loads influencing adversely on power quality parameters on the grid side. Hybrid power quality conditioner (HPQC) has been utilized to compensate current unbalance, harmonics, and low power factor in the co-phase traction system simultaneously. By incrementing the traction load, the rating of the HPQC increases and may constraints its ap...
متن کاملEvaluation of Rail Potential Based on Power Distribution in DC Traction Power Systems
Running rails used as a return conductor and ungrounded scheme have been widely adopted in DC traction power systems. Due to the longitudinal resistance of running rails and insulation resistance of rail-to-ground, there will be a potential rise between running rails and the ground when return current flows through the running rails, which is known as rail potential. At present, abnormal rise o...
متن کاملMaximum Safety Regenerative Power Tracking for DC Traction Power Systems
Direct current (DC) traction power systems are widely used in metro transport systems, with running rails usually being used as return conductors. When traction current flows through the running rails, a potential voltage known as “rail potential” is generated between the rails and ground. Currently, abnormal rises of rail potential exist in many railway lines during the operation of railway sy...
متن کاملOptimization of Train Operation in Multiple Interstations with Multi-Population Genetic Algorithm
Subway systems consume a large amount of energy each year. How to reduce the energy consumption of subway systems has already become an issue of concern in recent years. This paper proposes an energy-efficient approach to reduce the traction energy by optimizing the train operation for multiple interstations. Both the trip time and driving strategy are considered in the proposed optimization ap...
متن کامل