Minimisation of the explosion shock wave load onto the occupants inside the vehicle during trinitrotoluene charge blast.
نویسندگان
چکیده
The aim of this study was to elaborate identification method of crew overload as a result of trinitrotoluene charge explosion under the military wheeled vehicle. During the study, an experimental military ground research was carried out. The aim of this research was to verify the mine blast resistance of the prototype wheeled vehicle according to STANG 4569 as well as the anti-explosive seat. Within the work, the original methodology was elaborated along with a prototype research statement. This article presents some results of the experimental research, thanks to which there is a possibility to estimate the crew's lives being endangered in an explosion through the measurement of acceleration as well as the pressure on the chest, head and internal organs. On the basis of our acceleration results, both effectiveness and infallibility of crew protective elements along with a blast mitigation seat were verified.
منابع مشابه
EXPERIMENTAL EVALUATION OF BLAST WAVE PARAMETERS IN UNDERWATER EXPLOSION OF HEXOGEN CHARGES
Behavior of blast wave in underwater explosion is of interest to metal forming community and ship designers. Underwater detonation is, also a potential hazard to the water intakes or a plant spent fuel pool. In this paper, some techniques for calculating free-field blast parameters such as pressure and impulse in underwater explosion and prediction of bubble pulsation parameters are presented a...
متن کاملNumerical Investigation of Circular Plates Deformation under Air Blast Wave
In the current research the maximum deflection of circular plates made of AA5010 and AA1100 alloys under blast load was investigated. Shock waves were produced by exploding a spherical charge in different distances from the center of plates. The ABAQUS software uses conwep equation for blast loading analysis. It was found the results of these simulations have about 30% to 40% inaccuracy in comp...
متن کاملSimulation of the Reactive Powder Concrete (RPC) Behavior Reinforcing with Resistant Fiber Subjected to Blast Load
In research or experimental works related to blast loads, the amount of explosion material and distance of explosion point are very important. So, in this paper has been attempted to present a parametric study of the reactive powder concrete subjected to blast load. The effect of the different amount of TNT adopted the literature, distance of explosion point from RPC slab and also the location ...
متن کاملNonlinear statics analysis of on offshore jaket platform in the case of explosion
Explosion and fire on an offshore rig can lead to its minor or complete damage and sinking which means the loss of life or environmental pollution. Hence the use of techniques such as blast wall is crucial to reduce the detrimental effects. These blast walls are designed for explosion wave of length between 0.1 to 1 of load mainly to protect the personnel and critical sections. In this research...
متن کاملValidation of a Simulation Process for Assessing the Response of a Vehicle and Its Occupants to an Explosive Threat
Lighter weight military vehicles facilitate faster transport, higher mobility, fuel conservation, and a reduced ground footprint of supporting forces. At the same time the design of ground combat vehicles to survive a blast from a mine or from any other explosive threats is of great interest in order to provide an appropriate level of protection for the vehicle and its occupants. Weight reducti...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- International journal of injury control and safety promotion
دوره 23 2 شماره
صفحات -
تاریخ انتشار 2016