Effects of Vertical Pre-Release Cracks on Prestressed Bridge Girders
نویسندگان
چکیده
منابع مشابه
Effects of Temperature Variations on Precast, Prestressed Concrete Bridge Girders
The monitoring of a precast, prestressed girder bridge during fabrication and service provided the opportunity to observe temperature variations and to evaluate the accuracy of calculated strains and cambers. The use of high curing temperatures during fabrication affects the level of prestress because the strand length is fixed during the heating, the coefficients of thermal expansion of steel ...
متن کاملPrestressed Concrete Girder Bridges Using Large 0.7 Inch Strands
The National Bridge Inventory (NBI) includes more than 600,000 bridges within the United States of Prestressed concrete girder bridges represent one of the most widely used bridge systems. The majority of these girder bridges were constructed using 0.5 and 0.6 inch diameter strands. The main impediments to using larger strand diameters are: 1) bed capacities, 2) lack of structural knowledge reg...
متن کاملThe Instrumentation and monitoring of the Vårby Bridge
Numerous cracks have been discovered in the Vårby Bridge near Stockholm, Sweden. All cracks are found at the junctions between the cross girders and the main girders, more specifically, at the welds connecting the vertical web stiffeners to the top flanges of the main girders. The cracks might possibly be causing serious problems if they are allowed to propagate through the entire length of the...
متن کاملOptimization of Precast Prestressed Concrete Bridge Girder Systems
60 A practical approach to the optimal design of precast, prestressed concrete highway bridge girder systems is presented. The approach aims at standardizing the optimal design of bridge systems, as opposed to standardizing girder sections. Structural system optimization is shown to be more relevant than conventional girder optimization for an arbitrarily chosen structural system. Bridge system...
متن کاملFirst Smart Bridge in Canada
On November 5, 1993, the City of Calgary completed the construction of the first smart prestressed concrete highway bridge built in Canada. A total of six pretensioned girders of a continuous two span skew highway bridge were prestressed using carbon fibre composite cables (CrCC) developed by Tokyo Rope, and Leadline rods produced by Mitsubishi Kasei, Japan. This paper describes the constructio...
متن کامل