Oxidative Destruction of Multilayer Diisopropyl Methylphosphonate Films by O(3P) Atomic Oxygen.
نویسندگان
چکیده
We present work detailing the oxidative destruction of the nerve agent simulant diisopropyl methylphosphonate (DIMP) with O(3P) using time-resolved, in situ reflection absorption infrared spectroscopy (RAIRS) and X-ray photoelectron spectroscopy (XPS). Thermally annealed DIMP films deposited on Au(111) are observed to react upon exposure to a supersonic beam containing O(3P) with average translational energies of 0.12 eV. The reaction is initiated by a hydrogen abstraction from one of three possible sites on DIMP, and then progresses through various secondary reactions with resultant hydroxyl radicals, carbon-centered DIMP-derived radicals, and nondissociated O2 in the beam. These reactions are accompanied by uptake of oxygen into the film, leading to new hydrogen bonding with the DIMP phosphoryl group. The generated product also presents greater thermal stability than pristine DIMP, suggesting the formation of a distribution of oligomeric and polymeric products. As reactivity is observed to decrease upon continued O(3P) exposure, this product likely forms a protective layer at the vacuum-film interface, hindering destruction of thicker films. Importantly, the rate of reaction and general reactivity trends are the same between DIMP and the smaller simulant dimethyl methylphosphonate (DMMP). The comparable reaction rates of the two molecules coupled with oxygen's inability to erode thick films all the way down to the substrate have specific implications for the development of oxidation-based decontamination strategies for these and other organophosphates in the solid phase. The findings presented in this paper add significant new fundamental understanding of the oxidative chemistry of such species, knowledge needed in order to develop efficacious nerve agent decontamination strategies as well as the refinement of existing models for the dispersal, adsorption, persistence, and destruction of organophosphates in the environment.
منابع مشابه
Deposition of Al/Cu Multilayer By Double Targets Cylindrical DC Magnetron Sputtering System
A cylindrical direct current magnetron sputtering coater with two targets for deposition of multilayer thin films and cermet solar selective surfaces has been constructed. The substrate holder was able to rotate around the target for obtaining the uniform layer and separated multilayer phases. The Al/ Cu multilayer film was deposited on the glass substrate at the following conditions: Working g...
متن کاملFlexible carbon nanotube sensors for nerve agent simulants.
Chemiresistor-based vapour sensors made from network films of single-walled carbon nanotube (SWNT) bundles on flexible plastic substrates (polyethylene terephthalate, PET) can be used to detect chemical warfare agent simulants for the nerve agents Sarin (diisopropyl methylphosphonate, DIMP) and Soman (dimethyl methylphosphonate, DMMP). Large, reproducible resistance changes (75-150%), are obser...
متن کاملGauging the significance of atomic oxygen [O(3P)] in sulfoxide photochemistry. A method for hydrocarbon oxidation.
A liquid-phase photolysis of 1,2-benzodiphenylene sulfoxide, 1, and dibenzothiophene sulfoxide, 2, was used to generate atomic oxygen [O(3P)] or an equivalent active oxygen species. The reaction for sulfoxide photodeoxygenation was similar to a microwave discharge method for generating O(3P) atoms in the condensed phase (Zadok, E.; Rubinraut, S.; Mazur, Y. J. Org. Chem. 1987, 52, 385-90). Sulfo...
متن کاملMorphological, structural and photoresponse characterization of ZnO nanostructure films deposited on plasma etched silicon substrates
ZnO nanostructure films were deposited by radio frequency (RF) magnetron sputtering on etched silicon (100) substrates using dry Ar/SF6 plasma, at two etching times of 5 min and 30 min, and on non etched silicon surface. Energy dispersive X-ray (EDX) technique was employed to investigate the elements contents for etched substrates as well as ZnO films, where it is found to be stoichiometric. Su...
متن کاملPreparation of plastic and biopolymer multilayer films by plasma source ion implantation.
The plasma source ion implantation (PSII) technique was used to improve the adhesion between linear low-density polyethylene (LLDPE) and biopolymer. LLDPE was treated with the PSII using O(2) or CF(4) gas to modify its surface. After modification, chitosan or corn zein was used for coating on LLDPE. Wettability of the LLDPE surface was evaluated with a contact angle meter by the sessile drop me...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- The journal of physical chemistry. B
دوره 122 2 شماره
صفحات -
تاریخ انتشار 2018