A capacitive RF power sensor based on MEMS technology
نویسندگان
چکیده
Wideband 100 kHz–4 GHz power sensors are presented, which are based on sensing the electrostatic force between an RF signal line and a suspended membrane. The electrostatic force, which is proportional to the square of the rms signal voltage and thus to the signal power, results in a displacement of the suspended membrane. This displacement is detected capacitively, allowing the sensing of the signal power with extremely low dissipative losses; therefore the sensor can be placed in a transmission line with negligible disturbance of the signal. Devices have been designed and fabricated successfully by aluminum surface micromachining using photoresist as the sacrificial layer. Optimization of the design with SONNET has resulted in measured return and insertion losses (S11 and S21) better than −30 dB and −0.15 dB, respectively, up to 4 GHz, and a sensitivity of 90 aF mW–1.
منابع مشابه
Design and simulation of a RF MEMS shunt capacitive switch with low actuation voltage, low loss and high isolation
According to contact type, RF MEMS switches are generally classified into two categories: Capacitive switches and Metal-to-Metal ones. The capacitive switches are capable to tolerate a higher frequency range and more power than M-to-M switches. This paper presents a cantilever shunt capacitive RF MEMS switch with characteristics such as low trigger voltage, high capacitive ratio, short switchin...
متن کاملDesign of Novel High Sensitive MEMS Capacitive Fingerprint Sensor
In this paper a new design of MEMS capacitive fingerprint sensors is presented. The capacitive sensor is made of two parallel plates with air gap. In these sensors, the capacitance changes is very important factor. It is caused by deformation of the upper electrode of sensor. In this study with making slots in upper electrode, using T-shaped protrusion on diaphragm in order to concentrate the f...
متن کاملModeling of capacitance and sensitivity of a MEMS pressure sensor
In this paper modeling of capacitance and sensitivity for MEMS capacitive pressure sensor is presented. In capacitive sensor the sensitivity is proportional to deflection and capacitance changes versus pressure. Therefore first the diaphragm displacement, capacitance and sensitivity of sensor with square diaphragm have been modeled and then simulated using finite element method (FEM). It can b...
متن کاملDesign of High Sensitivity and Linearity Microelectromechanical Systems Capacitive Tire Pressure Sensor using Stepped Membrane
This paper is focused on a novel design of stepped diaphragm for MEMS capacitive pressure sensor used in tire pressure monitoring system. The structure of sensor diaphragm plays a key role for determining the sensitivity of the sensor and the non-linearity of the output.First the structures of two capacitive pressure sensors with clamped square flatdiaphragms, with different thicknesses are inv...
متن کاملRadio frequency power sensor based on MEMS technology - Sensors, 2003. Proceedings of IEEE
We present the first measurement results of a power sensor for radio Pequency ( r j signals (50 kHz 40 GHz) with almost no dissipation during the measurement. This sensor is, therefore, a ‘through’power sensor, that means that the rfsignal is available during the measurement of its power. The power detection has been realized by measuring capacitively the movement of a grounded aluminum membran...
متن کاملCouple Stress Effect on Micro/Nanocantilever-based Capacitive Gas Sensor
Micro/nanocantilevers have been employed as sensors in many applications including chemical and biosensing. Due to their high sensitivity and potential for scalability, miniature sensing systems are in wide use and will likely become more prevalent in micro/nano-electromechanical systems (M-NEMSs). This paper is mainly focused on the use of sensing systems that employ micro/nano-size cantilever...
متن کامل