Chemically derived, ultrasmooth graphene nanoribbon semiconductors.
نویسندگان
چکیده
We developed a chemical route to produce graphene nanoribbons (GNR) with width below 10 nanometers, as well as single ribbons with varying widths along their lengths or containing lattice-defined graphene junctions for potential molecular electronics. The GNRs were solution-phase-derived, stably suspended in solvents with noncovalent polymer functionalization, and exhibited ultrasmooth edges with possibly well-defined zigzag or armchair-edge structures. Electrical transport experiments showed that, unlike single-walled carbon nanotubes, all of the sub-10-nanometer GNRs produced were semiconductors and afforded graphene field effect transistors with on-off ratios of about 10(7) at room temperature.
منابع مشابه
Analytical modeling of trilayer graphene nanoribbon Schottky-barrier FET for high-speed switching applications
Recent development of trilayer graphene nanoribbon Schottky-barrier field-effect transistors (FETs) will be governed by transistor electrostatics and quantum effects that impose scaling limits like those of Si metal-oxide-semiconductor field-effect transistors. The current-voltage characteristic of a Schottky-barrier FET has been studied as a function of physical parameters such as effective ma...
متن کاملZener tunnelling in graphene based semiconductors – the k·p method
The carbon nanotube and graphene nanoribbon band structure is derived using the two-band k · p method and shown to have a similar band structure as a III-V semiconductor. Contrary to a previous claim, it is shown that the tunnelling probability is lower for a graphene based semiconductor than for a III-V semiconductor with the same bandgap. Considering the relation between the bandgap and the e...
متن کاملGraphene nanomesh
Graphene has significant potential for application in electronics, but cannot be used for effective field-effect transistors operating at room temperature because it is a semimetal with a zero bandgap. Processing graphene sheets into nanoribbons with widths of less than 10 nm can open up a bandgap that is large enough for room-temperature transistor operation, but nanoribbon devices often have ...
متن کاملThe stability and electronic properties of novel three-dimensional graphene-MoS2 hybrid structure
Three-dimensional (3D) hybrid layered materials receive a lot of attention because of their outstanding intrinsic properties and wide applications. In this work, the stability and electronic structure of three-dimensional graphene-MoS2 (3 DGM) hybrid structures are examined based on first-principle calculations. The results reveal that the 3 DGMs can easily self-assembled by graphene nanosheet ...
متن کاملJosephson Current For a Graphene Nanoribbon Using a Lattice Model
A tight binding approach based on the Bogoliubov-de Gennes approach has been used to calculate the DC Josephson current for a lattice model for S-GNR-S junctions , for short junctions with respect to superconducting coherence length. We calculate the phase, length, width and chemical potential dependence at the Josephson junction and discuss the similarities and differences with regard to the t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Science
دوره 319 5867 شماره
صفحات -
تاریخ انتشار 2008