A Pd-free activation method for electroless nickel deposition on copper
نویسندگان
چکیده
Article history: Received 4 June 2012 Accepted in revised form 30 March 2013 Available online 6 April 2013
منابع مشابه
Preparation of Pd composite membrane via organic-inorganic activation method in electroless plating technique
A palladium composite membrane was prepared via electroless plating technique using organic-inorganic method during activation process. The ceramic support surface was modified by two TiO2-boehmite and one γ-alumina layers to avoid Pd penetration in support pores. Thin and defect-free Pd composite membrane was obtained by creating a relative smoothness on the ceramic support and using Pd nanopa...
متن کاملNovel Electroless Plating of Ruthenium for Fabrication of Palladium-Ruthenium Composite Membrane on PSS Substrate and Its Characterization
This paper focused on a novel method of electroless plating ruthenium (Ru) on solid or porous substrates like porous stainless steel (PSS) discs or ceramic tubes. A novel complexing plating bath of Ru was developed. It is proven that Ru can be deposited directly on these substrates by the bath at a temperature of 328 K and strong alkaline environment. TGA, SEM, EDX and XRD confirmed the success...
متن کاملUnder Bump Metallisation of Fine Pitch Flip-chip Using Electroless Nickel Deposition
For solder based flip-chip assembly, the deposition of an under bump metallisation (UBM) layer onto the surface of the AI bondpads of the die is the first step in the wafer bumping process. The UBM is necessary, as the fragile AI pad has a tenacious oxide layer that cannot be soldered without the use of strong fluxes and a barrier layer is required to prevent dissolution of the bondpad into the...
متن کاملMicrofluidic Patterning of Metal Structures for Flexible Conductors by In Situ Polymer‐Assisted Electroless Deposition
A low-cost, solution-processed, versatile, microfluidic approach is developed for patterning structures of highly conductive metals (e.g., copper, silver, and nickel) on chemically modified flexible polyethylene terephthalate thin films by in situ polymer-assisted electroless metal deposition. This method has significantly lowered the consumption of catalyst as well as the metal plating solution.
متن کاملManufacture of Electroless Nickel/YSZ Composite Coatings
The paper discusses optimising work on a method of processing ceramic / metal composite coatings for various applications and is based on preliminary work on processing anodes for solid oxide fuel cells (SOFCs). The composite coating is manufactured by the electroless co-deposition of nickel and yttria stabilised zirconia (YSZ) simultaneously on to a ceramic substrate. The effect on coating cha...
متن کامل