Simulation of Well Wall Stress Distribut
نویسندگان
چکیده
In 1898s, Kirsch established the 2-D stress distribution formu Jaeger and Cook made a thorough derivation of Kirsch’s formula classic model to predict stress distribution based on elastic mecha formation, which makes it suitable for completely homogeneo permeability effect, Burshtein, Fairhurst and Adler et al. derived b further investigated the stress distribution in bilinear elastic rocks a function of the material’s elastic properties [7].
منابع مشابه
Numerical simulation of nanofluid flow over diamond-shaped elements in tandem in laminar and turbulent flow
In this paper, the Al2O3-water nanofluid flow in laminar and turbulent flows inside tubes fitted with diamond-shaped turbulators is numerically modeled. The nanofluid flow is modeled by employing a two-phase mixture method and applying the constant heat flux boundary condition at tube walls. In the results, the effects of different parameters such as the geometry of turbulators, volume fraction...
متن کاملشبیه سازی مستقیم عددی جریان آشفته توسعه یافته در کانال با شرط مرزی لغزش روی یکی از دیوارها
In this study, the results of a direct numerical simulation of turbulent drag reduction in a channel flow by hydrophobic coating at a nominal shear Reynolds number of Reτ = 180 are reported. Slip condition is imposed on the lower wall whereas the upper wall has no-slip condition. For this purpose, the use is made of a numerical simulation of three-dimensional, time-dependent Navier-Stokes e...
متن کاملCategorical distribution
In probability theory and stat ist ics, a categorical distribut ion (occasionally "discrete distribut ion" or "mult inomial distribut ion", both imprecise usages) is a probability distribut ion that describes the result of a random event that can take on one of K possible outcomes, with the probability of each outcome separately specif ied. There is not necessarily an underlying ordering of the...
متن کاملNumerical Study of Reynolds Number Effects on Flow over a Wall-Mounted Cube in a Channel Using LES
Turbulent flow over wall-mounted cube in a channel was investigated numerically using Large Eddy Simulation. The Selective Structure Function model was used to determine eddy viscosity that appeared in the subgrid scale stress terms in momentum equations. Studies were carried out for the flows with Reynolds number ranging from 1000 to 40000. To evaluate the computational results, data was compa...
متن کاملExperimental study and numerical simulation of three dimensional two phase impinging jet flow using anisotropic turbulence model
Hydrodynamic of a turbulent impinging jet on a flat plate has been studied experimentally and numerically. Experiments were conducted for the Reynolds number range of 72000 to 102000 and a fixed jet-to-plate dimensionless distance of H/d=3.5. Based on the experimental setup, a multi-phase numerical model was simulated to predict flow properties of impinging jets using two turbulent models. Mesh...
متن کامل