Design of Heat Exchanger for Ericsson-Brayton Piston Engine

نویسندگان

  • Peter Durcansky
  • Stefan Papucik
  • Jozef Jandacka
  • Michal Holubcik
  • Radovan Nosek
چکیده

Combined power generation or cogeneration is a highly effective technology that produces heat and electricity in one device more efficiently than separate production. Overall effectiveness is growing by use of combined technologies of energy extraction, taking heat from flue gases and coolants of machines. Another problem is the dependence of such devices on fossil fuels as fuel. For the combustion turbine is mostly used as fuel natural gas, kerosene and as fuel for heating power plants is mostly used coal. It is therefore necessary to seek for compensation today, which confirms the assumption in the future. At first glance, the obvious efforts are to restrict the use of largely oil and change the type of energy used in transport. Another significant change is the increase in renewable energy--energy that is produced from renewable sources. Among machines gaining energy by unconventional way belong mainly the steam engine, Stirling engine, and Ericsson engine. In these machines, the energy is obtained by external combustion and engine performs work in a medium that receives and transmits energy from combustion or flue gases indirectly. The paper deals with the principle of hot-air engines, and their use in combined heat and electricity production from biomass and with heat exchangers as primary energy transforming element.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Conceptual design of a super-critical CO2 brayton cycle based on stack waste heat recovery for shazand power plant in Iran

Conceptual design of a waste heat recovery cycle is carried out in attempt to enhance the thermal efficiency of a steam power plant. In the recovery system, super-critical an CO2 is employed as the working fluid operating in a Brayton cycle. Low grade heat rejected by the flue gases through the stack is used as the primary heat source, while a secondary heat exchanger utilizes th...

متن کامل

An Investigation on the Effects of Gas Pressure Drop in Heat Exchangers on Dynamics of a Free Piston Stirling Engine

This paper is devoted to study the effects of pressure drop in heat exchangers on the dynamics of a free piston Stirling engine. First, the dynamic equations governing the pistons as well as the gas pressure equations for hot and cold spaces of the engine are extracted. Then, by substituting the obtained pressure equations into the dynamic relationships the final nonlinear dynamic equations gov...

متن کامل

Dynamic Modeling of a Regenerator for the Control-Based Design of Free-Piston Stirling Engines

This paper describes a new approach to modeling and designing free-piston Stirling engines with the goal of building a working prototype. The Stirling cycle is recast as a dynamic system where control design tools and techniques can be applied to determine optimal manufacturable parameters for the engine. A simplified state-space analysis exhibits the merits of this perspective by revealing a l...

متن کامل

Corrosion Failure Study in an Oil Cooler Heat Exchanger in Marine Diesel Engine

In this article, the failure of a heat exchanger during its operation in the marine environment has been analyzed. This heat exchanger was used for cooling the oil in a marine diesel engine. Based on the existing failure history, damages in engine components were observed after 89 hours of engine working due to the leakage of the sea water to the oil. For the objective of the failure analysis, ...

متن کامل

PSFC/JA-10-4 Evaluation of turbo-Brayton cycle for cooling current leads: Integrated current lead/heat exchanger

We investigate the optimization of turbo-Brayton cycles for cooling current leads. Simple models of single stage current lead, two-stage current lead and two stage current lead coupled with a double stage turbo-Brayton cycle have been used to provide understanding about the issues and the tradeoffs. In addition, we discuss the possibility of using the heat exchanger in the turbo-Brayton system ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 2014  شماره 

صفحات  -

تاریخ انتشار 2014