Current Doubler Rectifier for High Power and Low Voltage DC/DC Converter Applications
نویسندگان
چکیده
The rectifier has important influence on a DC/DC converter’s characteristics including the efficiency, the output voltage ripple and the dynamic behavior. By analyzing the difference between the center trapped rectifier and the double current rectifier, this document explains and demonstrates the advantage of the current doubler rectifier for DC/DC converters with especially high power but low output voltage which mean very high output current.
منابع مشابه
Studies on Quasi-Z-Source-Based Three-Phase Isolated DC/DC Converter for Distributed Power Generation
Distributed generation is an emerging concept in the electricity sector, which represents good alternatives for electricity supply instead of the traditional centralized power generation concept. Among different distributed generation schemes, fuel cell is expected play a big part due to its inherent advantages. The power density of the quasi-Z-source-based single-phase isolated DC/DC converter...
متن کاملDesign Consideration for High Power Zero Voltage Zero Current Switching Full Bridge Converter with Transformer Isolation and Current Doubler Rectifier
This paper presents the design and analysis and of the proposed zero voltage zero current switching (ZVZCS) full bridge dc-dc converter with transformer isolation and current doubler rectifier for high power and high performance by introducing ZVS for lagging leg and ZCS for leading leg operation It has a simple and robust structure with asymmetrical shifted pulse width modulation technique. Th...
متن کاملA Bridge Voltage Doubler Ac/dc Converter for Low-voltage Energy Harvesting Applications
Efficient ac/dc rectification of low voltages is critical for the realization of fully-functional vibrational energy harvesting systems. This paper presents the design and experimental characterization of low-power ac/dc converter designed to operate with very low input voltage amplitudes (as low as 20 mV) for magnetic induction energy harvesters. The bridge voltage doubler provides a dc output...
متن کاملA High Efficiency Low-Voltage Soft Switching DC–DC Converter for Portable Applications
This paper presents a novel control method to improve the efficiency of low-voltage DC-DC converters at light loads. Pulse Width Modulation (PWM) converters have poor efficiencies at light loads, while pulse frequency modulation (PFM) control is more efficient for the same cases. Switching losses constitute a major portion of the total power loss at light loads. To decrease the switching losses...
متن کاملA Protection Circuit for DC-DC Converter with Voltage Doubler
This paper proposes a method to obtain a protected voltage gain by employing a protection circuit for the voltage doubler or multiplier circuit in an isolated tyde DC-DC Converter. The entire set up consists of a phase shift converter with a protected bridge/voltage doubler rectifier on the output side. The operating frequency of the phase shift converter is 20-25kHz (depending on the requireme...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2013