Mercury capture by regenerable sorbents under oxycoal combustion conditions

نویسندگان

  • C.Gómez-Giménez
  • E.García-Díez
چکیده

The largest source of mercury to the atmosphere in the world is the burning of fossil fuels, primarily coal. Electrical power plants are estimated to account for about 25% of the global anthropogenic mercury emissions to the atmosphere and industrial and residential heating for another 20% [1]. According to the European Environmental Agency (EEA), Spain is the third country among EU27 in mercury emissions, mainly due to coal-fired plants [4]. Mercury is found in coal in the form of sulphides or associated to them, interchanged on clays and associated to the organic matter in low rank coals. During the combustion processes, these forms evaporate, giving rise to Hg(0), HgO and HgCl2, which proportions in gas phase depend on the concentration and mode of occurrence in the coal and on the compounds present in the gaseous stream, especially particulates and HCl. The environmental implications of mercury do not correspond only to the emissions to the atmosphere; the quality of CO2 to be transported and sequestered has been subject of research, concerning trace quantities of heavy metals participating in mineralization and precipitation reactions in sequestration conditions. However, for coal oxycombustion mercury is not an environmental issue alone but also an operational issue, particularly about where mercury could accumulate within the CO2 processing unit. The removal of Hg is necessary to prevent Hg attack on the aluminium heat exchangers. Because of this, an activated carbon bed guard is placed downstream the dryers. Once exhausted, this activated carbon must be treated as a toxic residue. Regenerable sorbents can accomplish high mercury retention that can be recovered as well as balance cost because of its regenerability. Recognizing reversible characteristics of mercury amalgamate with gold have been widely used to pre-concentrate low concentration of elemental mercury for its detection. The gold-mercury amalgam is extremely stable at room temperature. However, the amalgam decomposes to release mercury to a gas phase at

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A New Approach for Retaining Mercury in Energy Generation Processes: Regenerable Carbonaceous Sorbents

The energy production processes from fossil fuels represent the first anthropogenic source of mercury emissions in Europe and the second in the world. Among the different possibilities that can be posed to reduce these emissions, this work focuses on the use of regenerable sorbents based on gold nanoparticles dispersed on activated carbon foam. The use of regenerable sorbents would not only all...

متن کامل

Influence of temperature and regeneration cycles on Hg capture and efficiency by structured Au/C regenerable sorbents.

The objective of this work is to evaluate a novel regenerable sorbent for mercury capture based on gold nanoparticles supported on a honeycomb structured carbon monolith. A new methodology for gold nanoparticles deposition onto carbon monolith support has been developed to obtain an Au sorbent based on the direct reduction of a gold salt onto the carbon material. For comparison purposes, colloi...

متن کامل

CO2 Capture Performance Using Biomass-templated Cement-supported Limestone Pellets

Synthetic biomass-templated cement-supported CaO-based sorbents were produced by granulation process for high-temperature post-combustion CO2 capture. Commercial flour was used as the biomass and served as a templating agent. The investigation of porosity showed that the pellets with biomass or cement resulted in enhancement of porosity. Four types of sorbents containing varying proportions of ...

متن کامل

Trace Metal Capture by Various Sorbents during Fluidized Bed Coal Combustion

Toxic trace metallic elements such as arsenic, beryllium, cadmium, chromium, cobalt, lead, manganese, mercury, nickel, and selenium are usually contained in coal in various forms and trace amounts. These metals will either stay in the ash or be vaporized during high temperature combustion. Portions of the vaporized metals may eventually be emitted from a combustion system in the form of metal f...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2013