3d Resampling for Airborne Laser Data of Urban Areas
نویسنده
چکیده
We consider the problem of resampling for the data obtained by laser scanning on an irregular grid. The data obtained by airborne laser scanning are scattered, and the resampling on a regular grid is needed for the generation of digital surface models (DSM). Some well-known methods are considered in this article: triangle-based linear interpolation, trianglebased nearest neighbor interpolation and kriging. An energy minimization approach is proposed which allows to avoid the drawbacks relevant to these methods. This approach allows to impose a model of surface corresponding to urban areas. The energy function is adapted to deal with the scattered data, and its parameters are chosen to fit the model of a urban area. A correlation coefficient is used to compare the results. The methods are tested on real data irregularly spaced 3D points laser scanner data of Brussels. Visual and numerical experimentation results are presented.
منابع مشابه
Detailed Building Reconstruction from Airborne Laser Data Using a Moving Surface Method
The increasing demand for a fast, efficient and low cost algorithm for extraction of 3D urban features was the motive behind this work. In this paper we present a new technique to reconstruct buildings with detailed roofs in urban areas using airborne laser scanning altimetry data. We have tried to show that dense airborne laser scanning data is sufficient for detailed 3D reconstruction of urba...
متن کاملConditional Random Fields for Airborne Lidar Point Cloud Classification in Urban Area
Over the past decades, urban growth has been known as a worldwide phenomenon that includes widening process and expanding pattern. While the cities are changing rapidly, their quantitative analysis as well as decision making in urban planning can benefit from two-dimensional (2D) and three-dimensional (3D) digital models. The recent developments in imaging and non-imaging sensor technologies, s...
متن کاملCombining High Resolution Satellite Imagery and Airborne Laser Scanning Data for Generating Bareland Dem in Urban Areas
This paper proposes a framework for generating bare-land Digital Elevation Model (DEM) in urban areas by combining highresolution satellite imagery and Airborne Laser Scanning (ALS) data. Airborne laser scanners offer an efficient approach for 3D data acquisition. ALS data provides very accurate position and height information, but less direct information on ground objects’ geometrical shape, m...
متن کاملRegistration of Airborne Laser Data with One Aerial Image
At present, the calibration of airborne laser scanner data relies on the estimation of the position and attitude of the aircraft during the acquisition using GPS and INS systems, but also on the estimation of some other parameters: time bias, scan angle offset, etc, which usually requires the acquisition of extra data over known features: along and across the airport runway, over an horizontal ...
متن کاملAnalysis of Full-waveform Lidar Data for Classification of Urban Areas
In contrast to conventional airborne multi-echo laser scanner systems, full-waveform (FW) lidar systems are able to record the entire emitted and backscattered signal of each laser pulse. Instead of clouds of individual 3D points, FW devices provide connected 1D profiles of the 3D scene, which contain more detailed and additional information about the structure of the illuminated surfaces. This...
متن کامل