Vibration Damping of High-Chromium Ferromagnetic Steel
ثبت نشده
چکیده
The aim of the present work is to study the effect of annealing on the vibration damping capacity of high-chromium (16%) ferromagnetic steel. The alloys were prepared from raw materials of 99.9% purity melted in a high frequency induction furnace under high vacuum. The samples were heat-treated in vacuum at various temperatures (800 to 1200oC) for 1 hour followed by slow cooling (120oC/h). The inverted torsional pendulum method was used to evaluate the vibration damping capacity. The results indicated that the vibration damping capacity of the alloys is influenced by annealing and there exists a critical annealing temperature after 1000oC. The damping capacity increases quickly below the critical temperature since the magnetic domains move more easily. Keywords—Vibration, Damping, Ferromagnetic, Steel.
منابع مشابه
Health Monitoring of Welded Steel Pipes by Vibration Analysis
In the present work, structure health monitoring (SHM) of welded steel pipes was used to diagnosis their state via vibration based damage detection techniques. The dynamic quantities such as Frequency Response Functions (FRFs), mode shapes and modal parameters from structural vibration to detect damage were measured, set on linear averaging mode, with a maximum frequency of analysis of 3.2 kHz....
متن کاملEffect of Composite Material on Damping Capacity Improvement of Cutting Tool in Machining Operation Using Taguchi Approach
Chatter vibrations, occurring during cutting process, cause vibration between the cutting tool and workpiece, which deteriorates surface roughness and reduces tool life. The purpose of this study is to investigate the influence of cutting parameters and tool construction on surface roughness and vibration in turning of aluminum alloy AA2024. A new design of cutting tool is proposed, which is fi...
متن کاملComparative Study of Damping in Pristine, Steel, and Shape Memory Alloy Hybrid Glass Fiber Reinforced Plastic Composite Beams of Equivalent Stiffness
Several efforts were made over the years to control vibration of structural components made of composite materials. This paper consists of study on effect of using shape memory alloy (SMA) to increase the damping of glass fiber reinforced plastic (GFRP) composites. A comparative study between SMA and steel was made as reinforcement material in GFRP composites to enhance damping. Dimensions of e...
متن کاملPassive Vibration Control for Fatigue Damage Mitigation in Steel Jacket Platforms
Considering the stress cycles in the joints and members due to wave induced forces on offshore platforms, fatigue analysis is therefore one of the most important analyses in the offshore platforms design. Although most of the steel jacket type platforms are designed and located in areas with relatively high ratios of operational sea-states, for maximum environmental events, would have acceptabl...
متن کاملInvestigation of Thermoelastic Damping in the Longitudinal Vibration of a Micro Beam
In the design of high Quality factor (Q) micro or nano beam resonators, different dissipation mechanisms may have damaging effects on the quality factor. One of the major dissipation mechanisms is the thermoelastic damping (TED) that needs an accurate consideration for prediction. In this paper, thermoelastic damping of the longitudinal vibration of a homogeneous micro beam with both ends clamp...
متن کامل