ONE STEP ELECTRODEPOSITION OF CuInSe2 THIN FILMS
نویسندگان
چکیده
Formation of CuInSe2 (CIS) thin films from aqueous solution containing citrate as complexing agent is reported. The surface morphology and the composition of the deposited films are characterized by scanning electron microscopy (SEM). The texture of the deposits and their compositions are analyzed by X-ray diffraction and transmission electron microscopy (TEM). Annealing of the films at 350°C in flowing argon electrodeposited at potentials in the range [-0.24, -0.4 (V vs Ag/AgCl)] resulted in the formation of alpha-Cu2Se (JCPDS 24-1131) and CuSe (JCPDS 6-0427). On the contrary, annealing in the same conditions of the films electrodeposited between -0.4 and -0.6 V vs Ag/AgCl led to the formation of chalcopyrite CuInSe2 (JCPDS 23-209) with alpha-Cu2Se (JCPDS 24-1131) as secondary phase. The formation of CuInSe2 films with a chalcopyrite structure and good stoichiometry is observed.
منابع مشابه
Effects of photo-assisted electrodeposited on CuInSe2 thin films
Photo-assisted one-step electrodeposition has been applied to help in forming smooth and dense CuInSe2 films. The difference in surface morphology and crystalline quality between CuInSe2 films with various photo-assistance has been investigated. In the photo-assisted electrodeposition process, the many kinds of lamps providing maximum light intensity at about 380 to 620 nm were used as light so...
متن کاملElectrodeposited CuInSe2 thin film junctions
We have investigated thin films and junctions based on copper indium diselenide (CIS) which have been grown by electrochemical deposition. CIS is a leading candidate for use in polycrystalline thin film photovoltaic solar cells. Electrodeposition is a cost-effective method for producing thin-film CIS. We have produced both p and n type CIS thin films from the same aqueous solution by simply var...
متن کاملCuIn(S,Se)(2) thin films prepared from a novel thioacetic acid-based solution and their photovoltaic application.
Low-cost and high-yield preparation of CuInSe2 films is the bottleneck for promising CuInSe2-based thin film solar cells. Here, we developed a simple, safe and cost-effective method using thioacetic acid to fabricate the absorber films of CuIn(S,Se)2 (CISSe). Dissolution of Cu2O and In(OH)3 in thioacetic acid was attributed to the strong coordination ability of S. The adhesive precursor solutio...
متن کاملPulsed electrodeposition of CuInSe2 films for photovoltaic applications
Copper indium diselenide thin films have been prepared onto ITO (In2O3:Sn) substrates by a newly developed pulsed electrodeposition method. The proposed scheme consists of a cyclically repeated pulsed potential sequence at the corresponding deposition potentials of elemental Cu, Se and In. When the potential is stepped back to the initial Cu electrodeposition potential after a full cycle to sta...
متن کاملEffect of Magnetic Field on Surface Morphology and Magnetic Properties of FeCu/Cu Nano layers Prepared by Electrodeposition Technique: Investigation of Magneto-hydrodynamic Effect
In this paper, the effect of magnetic field on the morphology, structure and magnetic properties of electrodeposited FeCu/Cu thin films was investigated. The films were deposited on Au2PdAg/glass substrates using electrodeposition technique in potentiostatic control. The magnetic fields of 5000 and 7000 Oe were applied on deposition bath during deposition. Two series of thin films were prepared...
متن کامل