Structural Intensity Simulation of Bolt Joints in Vibration Environment
نویسندگان
چکیده
The paper a nonlinear model of bolt joints structure in vibration environment is built, including the friction, contact and so on complex nonlinear factors. Structure Intensity (SI) of it is calculated by Finite Element Method (FEM) as an approach for the state identification of bolts joints structure in vibration environment. The plots of the structure intensity vector under different tightening torque were obtained and showed the SI changes of bolt joints structure with different tightening torque, and showed the energy distribution and transmission at different tightening torque.In order to compare, The SI maps of of rigid connected beam at different tightening torque also were obtained.
منابع مشابه
Numerical Analysis of Cyclic Behavior of Beam-To-Column Bolted Connections in Steel Frames
This article considers the seismic behavior of beam-to-column joints in steel frames for different bolt arrangements by using of finite element modeling. As the most important beam-to-column joint type, the beam-to-column joints with end-plate is chosen for the analysis. Four different specimens have been analyzed. These models had some differences such as bolt arrangement and the presence or a...
متن کاملA Study of Joint Damping in Metal Plates
For satellite applications the determination of the correct dynamic behaviour and in particular the structural damping is important to assess the vibration environment for the spacecraft subsystems and ultimately their capability to withstand the launch vibration environment. Therefore, the object of this investigation is to experimentally analyse a range of aluminium panel configurations to st...
متن کاملEvaluation of Fatigue Life Reduction Factors at Bolt Hole in Double Lap Bolted Joints Using Volumetric Method
In this research, the influence of bolt preload on the fatigue strength of 2024-T3 aluminium alloy double lap bolted joints has been studied experimentally and numerically. To do so, three sets of the specimens were prepared and each of them subjected to tightening torque of 1,2.5 and 5 N-m and then fatigue tests were conducted under various cyclic axial load levels. In the numerical method, th...
متن کاملInvestigation on the Effect of Tigthening Torque on the Stress Distribution in Double Lap Simple Bolted and Hybrid (Bolted -Bonded) Joints
In this research, the effects of torque tightening on the stress distribution in double lap simple bolted and hybrid (bolted-bonded) joints have been investigated numerically. In order to determine the bolt clamping force value due to tightening torque in simple bolted and hybrid joints, which is necessary in numerical simulation, an experimental approach has been proposed. To do so, two kinds ...
متن کاملA review on stress distribution, strength and failure of bolted composite joints
In this study, analytical models considering different material and geometry for both single and double-lap bolted joints were reviewed for better understand how to select the proper model for a particular application. The survey indicades that the analytic models selected for the adhesively single or double bolted lap joints, as well as T, scarf, and stepped joints, with linear material pr...
متن کامل