Hybrid Dc Accurate Charge Amplifier for Linear Piezoelectric Positioning
نویسندگان
چکیده
Piezoelectric transducers are known to exhibit less hysterisis when driven with current or charge rather than voltage. Despite this advantage, such methods have found little practical application due to the poor low frequency response of present current and charge driver designs. This paper introduces a new circuit topology free from low-frequency drift and DC load offsets. The hybrid load feedback charge amplifer contains a secondary lowfrequency voltage feedback loop to stabilize the low-frequency and DC operation of the amplifier.
منابع مشابه
DC/DC Step-Up Converters for Automotive Applications: a FPGA Based Approach
One emerging application of power electronics is the driving of piezoelectric actuators. These actuators can be used for different kinds of application. They are employed for micro and nano positioning tasks as well as hydraulic or pneumatic valves, where they replace magnetic control elements. Piezoelectric actuators have some specific advantages such as high resolution of the displacement, ex...
متن کاملFPGA-Based Control of Piezoelectric Actuators
Abstract: In many industrial applications like semiconductor production and optical inspection systems, the availability of positioning systems capable to follow trajectory paths in the range of several centimetres, featuring at the same time a nanometre-range precision, is demanding. Pure piezoelectric stages and standard positioning systems with motor and spindle are not able to meet such req...
متن کاملAdaptive Control of Dynamic Systems with Sandwiched Hysteresis Based on Neural Estimator
1.1 Ultra-precision moving positioning stage A typical ultra-precision moving positioning stage is often used in ultra-precision manufacturing system for its nanometer displacement and fast linear moving speed. Usually, such platform consists of electric amplifiers, piezoelectric actuators and loads. As hysteresis is inherent in piezoelectric actuator, the amplifier and load can be considered a...
متن کاملControl of Piezoelectric Benders Using a Charge Drive
This article describes the use of a charge amplifier to improve the linearity of a piezoelectric bender. Existing charge drive circuits can not be directly applied to bimorph piezoelectric benders since they share a common electrode. In this article a new charge drive circuit and electrical configuration is described that allows piezoelectric bimorphs to be linearised with charge. Experimental ...
متن کاملA Novel Low-shock Calibration Method Using Digital Filter Technique
− A piezoelectric accelerometer output voltage with zero shift was induced by the low-frequency response of the charge amplifier. So we designed a virtual amplifier with same input-output characteristic as the charge amplifier, and shock sensitivities of a piezoelectric accelerometer were evaluated by applying the input acceleration to the virtual amplifier. The shock sensitivities were compara...
متن کامل