Comparative study of different Feeding Techniques for Rectangular Microstrip Patch Antenna
نویسندگان
چکیده
A Microstrip Patch Antenna is a type of radio antenna with a low profile, which can be mounted on a flat surface. It is a narrowband, wide-beam fed antenna fabricated by etching the antenna element pattern in metal trace bonded to an insulating dielectric substrate such as a printed circuit board with a continuous metal layer bonded to the opposite side of the substrate which forms a ground plane. It's various applications are biomedical diagnosis, mobile radio, remote sensing, wireless and satellite communications. A good impedance matching condition is required between the line and patch without any additional matching elements. This condition can be provided using various feeding techniques. In this paper, a comparative study between inset feed, microstrip feed and co-axial feed, on a rectangular microstrip patch antenna are done on the basis of S-parameter, Reflection gain, VSWR and Radiation Pattern using Hyperlynx 3D EM software.
منابع مشابه
Comparative Investigation of Half-mode SIW Cavity and Microstrip Hybrid Antenna Using Different Patch Shapes
A set of hybrid microstrip patch and semi-circular cavity antennas is introduced. The semi-circular cavity is implemented using Half-mode Substrate Integrated Waveguide (HMSIW) technique. Different shapes of patch include rectangular, semi-circular and equilateral triangular are excited using proximity effect by the circular SIW cavity at its TM010 mode of operation. The whole structures have b...
متن کاملModified Rectangular Patch Antenna Loaded With Multiple C Slots for Multiple Applications
A new multiple C-slotted microstrip patch antenna is proposed in the present study. A patch antenna is a wide-beam narrowband antenna. The microstrip patch antenna consists of a very thin metallic strip (patch) placed a small fraction of a wavelength above a ground plane. The patch can be designed in any possible shape and normally made of conducting materials such as copper or gold. This study...
متن کاملDesign Investigation of Microstrip Patch and Half-Mode Substrate Integrated Waveguide Cavity Hybrid Antenna Arrays
In this paper two linear arrays including a linear 1×4 and a planar 2×2 of microstrip patch and half-mode substrate integrated waveguide (SIW) cavity hybrid antenna are introduced and investigated. These are simply implemented using low cost single layer printed circuit board (PCB) process. The array element consists of a rectangular microstrip patch with appropriate dimensions in the vicinity ...
متن کاملA Capacitive Fed Microstrip Patch Antenna with Air Gap for Wideband Applications (RESEARCH NOTE)
In this paper a microstrip antenna on a suspended substrate with capacitive feed is presented. capacitive feed is created by a slot within the rectangular patch around the feed point. The proposed antenna exhibits a much higher impedance bandwidth of about 47% (S11 < −10 dB). Effects of key design parameters such as the air gap between the substrate and the ground plane, the gap width between r...
متن کاملA Survey on Different Feeding Techniques of Rectangular Microstrip Patch Antenna
In this paper describe the different feeding technique for wireless microstrip antenna, which are microstrip line feed, coaxial plane feed, proximity coupled feed and aperture couple feed. Microstrip line and coaxial probe feeds are contacting scheme, in which RF power directly to the radiating patch. Proximity and Aperture coupled feeds are non contacting schemes ,in which electromagnetic fiel...
متن کامل