Numerical Analysis of a Beam-energy-spread Monitor Using Multi-stripline Electrodes
نویسنده
چکیده
A beam-energy-spread monitor is under development in order to control and stabilize the energy spread of highcurrent single-bunch electron beams for producing a sufficient number of positrons. The author has proposed a new monitor using multi-stripline electrodes in order to reinforce this purpose. This report describes the basic design of the monitor based on a numerical analysis. The analysis result shows that the resolution of an energyspread measurement is expected to be less than 0.3% for nominal operation conditions.
منابع مشابه
Comparison of Stripline and Cavity Beam Position Monitors
Operational principles of stripline and pill-box cavity beam position monitors (BPMs) are discussed. Their theoretically best achievable position and time resolutions are computed. Numbers are estimated using design values of the proposed e+e− linear collider TESLA. Introduction Important characteristics of a beam position monitor (BPM) are position and time resolutions. Position resolution is ...
متن کاملBeam Position Monitor System of DAΦNE
The DAΦNE beam position monitor (BPM) system consists of 150 monitors installed all along the machine. Design issues, calibration procedures, experimental results and performance of the system are described. The closed orbit in the main rings is extracted from the BPM signals through narrowband receivers (realized by Bergoz Precision Beam Instrumentation for DAΦNE), then acquired and processed ...
متن کاملHigh-Brightness Electron Beam Diagnostics at the ATF*
The Brookhaven Accelerator Test Facility (ATF) is a dedicated user facility for accelerator physicists. Its design is optimized to explore laser acceleration and coherent radiation production. To characterize the lowemittance, picoseconds long electron beam produced by the ATF's photocathode RF gun, we have installed electron beam profile monitors for transverse emittance measurement, and devel...
متن کاملCockcroft 07-33 ELECTROMAGNETIC BACKGROUND TESTS FOR THE ILC INTERACTION-POINT FEEDBACK SYSTEM
We present results obtained with the T-488 experiment at SLAC Endstation A (ESA). A material model of the ILC extraction-line design was assembled and installed in ESA. The module includes materials representing the mask, beamline calorimeter, and first extraction quadrupole, encompassing a stripline interaction-point feedback system beam position monitor (BPM). The SLAC high-energy electron be...
متن کاملطراحی و شبیهسازی ستون شتابدهنده دوترونی الکترواستاتیکی 2MV
In this paper design and simulation of an optimized accelerator tube is presented for the production of light charged particles up to energy of 2 MeV. Geometry of the accelerator tube electrodes was simulated based on the Van De Graaff accelerator tubes of Atomic Energy Organization by SIMION 7.0, Virtual Device and SIMION Toolkit codes. In accelerator tube, the extracted ion beam from the ion ...
متن کامل