Analysis of volume distribution of power loss in ferrite cores
نویسندگان
چکیده
منابع مشابه
Inductor Design Method of DCM Interleaved PFC Circuit for 6.6-kW On-board Charger
Because the on-board charger (OBC) is installed in electric vehicles (EVs), high power density is regarded as a key technology. Among components of the OBC, inductors occupy more than 30% of the total volume. Thus, it is important to reduce the volume and the weight of inductors while maintaining thermal stability. Discontinuous conduction mode (DCM) can satisfy these requirements; however, onl...
متن کاملOptimum Design of a High-Power, High-Frequency Transformer - Power Electronics, IEEE Transactions on
A procedure for optimum design of a high-power, high-frequency transformer is PresentedThe Procedure is based on both electrical and thermal processes in the transformer and identifies a) the VA-rating of ferrite cores in relation to the operating frequency, , , ) the optimum flux density in the core, and c) the optimum current densities of the windings providing maximum transformer efficiency....
متن کاملHigh-Frequency Dimensional Effects in Ferrite-Core Magnetic Devices
(ABSTRACT) MnZn ferrites are widely used in power electronics applications where the switching frequency is in the range of several tens of kilohertz to a megahertz. In this range of frequencies the combination of relatively high permeability and relatively low conductivity found in MnZn ferrite helps to minimize the size of magnetic devices while maintaining high efficiency. The continuing imp...
متن کاملNonlinear Model of Tape Wound Core Transformers
Recently, tape wound cores due to their excellent magnetic properties, are widely used in different types of transformers. Performance prediction of these transformers needs an accurate model with ability to determine flux distribution within the core and magnetic loss. Spiral structure of tape wound cores affects the flux distribution and always cause complication of analysis. In this paper, a...
متن کاملOptimal Reconfiguration of Distribution Network for Power Loss Reduction and Reliability Improvement Using Bat Algorithm
In power systems, reconfiguration is one of the simplest and most low-cost methods to reach many goals such as self-healing, reliability improvement, and power loss reduction, without including any additional components. Regarding the expansion of distribution networks, communications become more complicate and the number of parameters increases, which makes the reconfiguration problem infeasib...
متن کامل