The Syracuse University Library Radius Project: Development of a non-destructive playback system for cylinder recordings
نویسندگان
چکیده
(Belfer) holds nearly 20,000 cylinder recordings produced during the 'cylinder era' of 1895-1929. Many cylinders have become deteriorated over the past one hundred years and cannot be played without suffering serious physical damage inflicted by the sharp styli (needles) of traditional mechanical playback machines. In some cases, even one pass of a stylus may irrevocably damage a cylinder. In response to the playback challenges of cylinder recordings, Syracuse University Library developed the Radius Project: Development of a Non-Destructive Playback System for Cylinder Recordings, funded by the Institute of Museum and Library Services. Recorded sound on a cylinder is represented by the alternating motion/velocity of the groove over a period of time. In order to capture sounds from cylinders in a non-destructive way, the Radius Project developed a prototype playback system that uses a laser beam to interrogate the cylinder. The system reconstructs sounds from cylinders by using an optical heterodyne interferometer to exploit the temporal, rather than spatial, coherence of the laser. The interferometer obtains a precise measurement of the Doppler frequency shift (the rate of change of optical phase shift) caused by the motion of the modulated groove in the cylinder, using wavelength of light as the unit of measure. The ability of the Radius system to measure the rate of change of optical phase shift may provide the optimal approach for reconstructing historically accurate sound from cylinder recordings. Successful completion of the Radius system will provide Belfer with the capability to preserve the sonic content of previously inaccessible cylinder recordings by producing high fidelity, historically accurate analog reproductions. In turn, and as copyright permits, Belfer will also be able to meet the changing needs and expectations of twenty-first century learners by contributing high fidelity, historically accurate digitized sounds from cylinders, thereby enriching the historical content of the World Wide Web.
منابع مشابه
Mechanical Stresses in a Linear Plastic FGM Hollow Cylinder Due to Non-Axisymmetric Loads
In this paper, an analytical solution for computing the linear plastic stresses and critical pressure in a FGM hollow cylinder under the internal pressure due to non-Axisymmetric Loads is developed. It has been assumed that the modulus of elasticity was varying through thickness of the FGM material according to a power law relationship. The Poisson's ratio was considered constant throughout the...
متن کاملMechanical and Thermal Stresses In a Linear Plastic FGM Hollow Cylinder Due to Axisymmetric Loads
In this paper, an analytical solution for computing the linear plastic stresses and critical temperature and pressure in a FGM hollow cylinder under the internal pressure and temperature is developed. It has been assumed that the modulus of elasticity and thermal coefficient of expansion were varying through thickness of the FGM material according to a power law relationship. The Poisson's rati...
متن کاملLib-Value: Values, Outcomes, and Return on Investment of Academic Libraries, Phase III: ROI of the Syracuse University Library
Bruce Kingma is a Professor in the School of Information Studies and Whitman School of Management at Syracuse University; e-mail: [email protected]. Kathleen McClure is Systems Librarian at the Okefenokee Regional Library System, e-mail: [email protected]. © 2015 Bruce Kingma and Kathleen McClure, Attribution-NonCommercial (http://creativecommons.org/licenses/by-nc/3.0/) CC BY-NC. This study me...
متن کاملAixsymmetric Stagnation Point Flow of a Viscous Fluid on a Moving Cylinder with Time Dependent Axial Velocity
The unsteady viscous flow in the vicinity of an axisymmetric stagnation point of an infinite moving cylinder with time-dependent axial velocity is investigated. The impinging free stream is steady with a strain rate k. An exact solution of the Navier-Stokes equations is derived in this problem. A reduction of these equations is obtained by use of appropriate transformations. The general self-si...
متن کاملDeveloping a Risk Management Model for Banking Software Development Projects Based on Fuzzy Inference System
Risk management is one of the most influential parts of project management that has a major impact on the success or failure of projects. Due to the increasing use of information technology (IT) systems in all fields and the high failure rate of IT projects in software development and production, it is essential to effectively manage these projects is essential. Therefore, this study is aimed t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- First Monday
دوره 8 شماره
صفحات -
تاریخ انتشار 2003