Low Power Combinational and Sequential Circuits with Adiabatic Complementary Pass-Transistor Logic (ACPL)
نویسندگان
چکیده
This paper presents low-power characteristics of adiabatic complementary pass-transistor logic (ACPL) using four-phase AC power supply. Adiabatic CPL circuits consist of pure NMOS transistors, use CPL blocks for evaluation and bootstrapped NMOS switches to eliminate non-adiabatic loss of output loads. In this paper, combinational circuit (4-bit ripple carry adder) and sequential circuit (4-bit binary counter) is realized with adiabatic CPL. These combinational and sequential circuits have been simulated in CADENCE design tool at 90nm technology and simulation results shows that the adiabatic CPL 4-bit ripple carry adder achieve power savings of 80% with PAL-2N logic and adiabatic CPL 4-bit binary counter achieve power savings of 52% with CMOS logic for clock frequencies from 50 to 300 MHz.
منابع مشابه
Design of Sequential Circuit using Low Power Adiabatic Complementary Pass Transistor Logic
Adiabatic logic style is Proving to be an attractive solution for low power digital design. The paper investigates low – power characteristics of complementary pass -transistor logic (CPL) circuits using AC power supply. The two-phase power-clock scheme is more suitable for the design of flip-flops and sequential circuits because it uses fewer transistors. The Adiabatic flip-flop have large ene...
متن کاملReduction of Static Power Dissipation in Adiabatic Combinational Circuits Using Power Gating MTCMOS
This paper proposes a method to reduce static power consumption in Adiabatic logic circuits based on Complementary Pass transistor Adiabatic Logic (CPAL) operated by two phase power clocks. We are applying power gating MTCMOS technique to reduce static power consumption in CPAL circuits. We tested MTCMOS power gating technique on 4-bit ripple carry adder to observe effect of static power reduct...
متن کاملPhysical Implementation and Testing of Low-Power Adiabatic Flip-Flops with Energy-Recycling Pads
This paper presents adiabatic flip-flops based on CPAL (complementary pass-transistor adiabatic logic) circuits with energy-recycling output pad cells. The energy-recycling output pad cells for driving adiabatic chips include mainly bonding pads, ESD (electrostatic discharge) protection circuits, and two stage energy-recycling buffers. The adiabatic flip-flops and sequential circuits with energ...
متن کاملA Single-Phase Register File with Complementary Pass-Transistor Adiabatic Logic
This paper introduces an adiabatic register file based on two-phase CPAL (Complementary Pass-Transistor Adiabatic Logic circuits) with power-gating scheme, which can operate on a single-phase power clock. A 32×32 single-phase adiabatic register file with power-gating scheme has been implemented with TSMC 0.18μm CMOS technology. All the circuits except for the storage cells employ two-phase CPAL...
متن کاملLow-Power Logic Styles: CMOS Versus Pass-Transistor Logic
Recently reported logic style comparisons based on full-adder circuits claimed complementary pass-transistor logic (CPL) to be much more power-efficient than complementary CMOS. However, new comparisons performed on more efficient CMOS circuit realizations and a wider range of different logic cells, as well as the use of realistic circuit arrangements demonstrate CMOS to be superior to CPL in m...
متن کامل