3D Scaffolded Nickel-Tin Li-Ion Anodes with Enhanced Cyclability.
نویسندگان
چکیده
A 3D mechanically stable scaffold is shown to accommodate the volume change of a high-specific-capacity nickel-tin nanocomposite during operation as a Li-ion battery anode. The nickel-tin anode is supported by an electrochemically inactive conductive scaffold with an engineered free volume and controlled characteristic dimensions, which engender the electrode with significantly improved cyclability.
منابع مشابه
3D tin anodes prepared by electrodeposition on a virus scaffold
A patterned coreeshell tin (Sn) nanorod anode is fabricated by pulse electrodeposition of Sn onto a selfassembled Tobacco Mosaic Virus (TMV) structured nickel current collector. Pulse electrodeposition onto the virus assembled 3D electrode surfaces produces homogenous Sn coatings with significant void space to accommodate the large volume change associated with Sn lithiation. The TMV enabled 3D...
متن کاملCriteria for Reliable Electrochemical Impedance Measurements on Li-Ion Battery Anodes
Specially designed five-electrode cells contained two types of mixed ionic-electronic conductor ~MIEC! lithium-insertion anodes. These were graphite or Sn1.3Al0.3Ti1.7O1.95(PO4)3 tin composite oxide ~TCO! bonded powders sandwiched between nickel mesh current collectors as working lithium-ion anodes, with Li foils on both sides as reference electrodes, outside of which were two further Li foils,...
متن کاملHigh rate and durable, binder free anode based on silicon loaded MoO3 nanoplatelets
In order to make fast-charging batteries a reality for electric vehicles, durable, more energy dense and high-current density resistant anodes need to be developed. With such purpose, a low lithiation potential of 0.2 V vs. Li/Li(+) for MoO3 nanoplatelet arrays is reported here for anodes in a lithium ion battery. The composite material here presented affords elevated charge capacity while at t...
متن کاملStable Cycling of SiO2 Nanotubes as High-Performance Anodes for Lithium-Ion Batteries
Herein, SiO2 nanotubes have been fabricated via a facile two step hard-template growth method and evaluated as an anode for Li-ion batteries. SiO2 nanotubes exhibit a highly stable reversible capacity of 1266 mAhg(-1) after 100 cycles with negligible capacity fading. SiO2 NT anodes experience a capacity increase throughout the first 80 cycles through Si phase growth via SiO2 reduction. The holl...
متن کاملStudy of Copper Bearing Alloys Corrosion Characteristics
This paper addresses investigation of the corrosion behavior of copper bearing anodes with high nickel content. Anodes are produced from different solid wastes formed during the copper or nickel row materials treatment. Nickel content in anode samples had values up to 10 mas %. The content of tin, lead and antimony was up to 1 % for each of elements. Sulphuric acid solution, concentration of 17...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Advanced materials
دوره 28 4 شماره
صفحات -
تاریخ انتشار 2016