Jump condition for GND evolution as a constraint on slip transmission at grain boundaries

نویسنده

  • A. ACHARYA
چکیده

The jump condition at a possibly non-material interface for geometricallynecessary dislocation density in field dislocation mechanics (FDM) and its averaged approximation, phenomenological mesoscopic FDM (PMFDM), is derived. In the context of grain boundaries, the condition implies a tensorial constraint on all five grain boundary parameters, slip transmission at the boundary, possible grain boundary motion and dislocation nucleation/ annihilation at the grain boundary. The jump condition is physically interpreted in special cases, and the importance of understanding dislocation motion at a boundary/interface as a flux across curves, and not surfaces, is emphasized.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Energy of slip transmission and nucleation at grain boundaries

Grain boundaries (GBs) provide a strengthening mechanism in engineering materials by impeding dislocation motion. In a polycrystalline material, there is a wide distribution of GB types with characteristic slip transmission and nucleation behaviors. Slip–GB reactions are not easy to establish analytically or from experiments; furthermore, there is a strong need to quantify the energy barriers o...

متن کامل

Critical assessment of hydrogen effects on the slip transmission across grain boundaries in α -Fe.

Grain boundaries (GBs) play a fundamental role in the strengthening mechanism of crystalline structures by acting as an impediment to dislocation motion. However, the presence of an aggressive environment such as hydrogen increases the susceptibility to intergranular fracture. Further, there is a lack of systematic investigations exploring the role of hydrogen on the dislocation-grain-boundary ...

متن کامل

Estimating geometrically necessary dislocation content near grain boundaries in deformed <001> columnar aluminum

The minimum amount of geometrically necessary dislocations (GND) required to create crystallographic orientation gradients near the grain boundaries in a uniaxially deformed <001> columnar aluminum specimen is computed from local orientation measurements obtained using electron backscattered diffraction patterns (EBSD). Plots correlating GND density and orientation gradient are presented.

متن کامل

Deformation of electrodeposited nanocrystalline nickel

The mechanisms of deformation and damage evolution in electrodeposited, fully dense, nanocrystalline Ni with an average grain size of ~30 nm and a narrow grain size distribution were investigated by recourse to (i) tensile tests performed in situ in the transmission electron microscope and (ii) microscopic observations made at high resolution following ex situ deformation induced by compression...

متن کامل

The effect of twinning on texture evolution during ECAP processing of an AM30 magnesium alloy

An AM30 magnesium alloy was processed through ECAP method at 200 °C. Optical and transmission electron microscopy as well as electron back scattered diffraction (EBSD) technique were employed to characterize the deformed microstructure. A partially recrystallized microstructure including ultrafine/nano structures was obtained. The area fraction of 49% was measured for the recrystallized regions...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2006